mlongue1

Samsung GVI SSC14WEB networking problems... friend has one of these systems, and we are having trouble connecting it to the internet... current network is centered around a D-Link DI-604 wired router, through a DSL modem, do not remember the brand name, but the Bellsouth DSL system currently runs very well, so there is no problem there... One of the problems is that the SSC14WEB Manual instructions are not very clear, and somewhat confusing, and even though I have done networking in the past, this is not clicking in my head... do not know whether to run this under Static IP, Dynamic IP(DHCP), or under PPPoE(ADSL), as the Manual instructions are confusing everyone... Another problem is that there is no way for me to tell the original IP address of the unit, as they were inputting many different IP addresses while attempting to get it to run, and now cannot remember the original numbers... is there a way to just reset the onboard server to default?... this would clear all current settings and restore the default settings... the last section of the Manual shows the connections through 4 different routers, and the D-Link router shown is the DI-624, which is the wireless version of the DI-604, the router he has, so it should work, I would think. I had previously owned the DI-604 (wired), good little router, and it is exactly like the DI-624(wireless), all settings are the same, but I do not know which network connection to use... anyway, thanks in advance, any possible help is greatly appreciated, and have a super day/week/weekend...

Samsung GVI SSC14WEB networking problems... friend has one of these systems, and we are having trouble connecting it to the internet... current network is centered around a D-Link DI-604 wired router, through a DSL modem, do not remember the brand name, but the Bellsouth DSL system currently runs very well, so there is no problem there... One of the problems is that the SSC14WEB Manual instructions are not very clear, and somewhat confusing, and even though I have done networking in the past, this is not clicking in my head... do not know whether to run this under Static IP, Dynamic IP(DHCP), or under PPPoE(ADSL), as the Manual instructions are confusing everyone... Another problem is that there is no way for me to tell the original IP address of the unit, as they were inputting many different IP addresses while attempting to get it to run, and now cannot remember the original numbers... is there a way to just reset the onboard server to default?... this would clear all current settings and restore the default settings... the last section of the Manual shows the connections through 4 different routers, and the D-Link router shown is the DI-624, which is the wireless version of the DI-604, the router he has, so it should work, I would think. I had previously owned the DI-604 (wired), good little router, and it is exactly like the DI-624(wireless), all settings are the same, but I do not know which network connection to use... anyway, thanks in advance, any possible help is greatly appreciated, and have a super day/week/weekend...