Hello,
equipment purchased in June 2016:
NVR Model: N6200-8E
Master Version: V4.0 (20151231)
Hardware version: v4.0
Camera Foscam FI9805E
System Firmware: v1.4.1.10
Firmware Application: v2.14.1.119
Plug-in: v3.1.0.9
This camera model is equipped with I / O contact for alarm input and output.
NVR operation with display and mouse:
Channel tab
Agenda registration tab:
- Events
Timer recording works.
- Movement
No recording
- Alarm
permanent record if in Enrée Alarm tab "Manage alarm" checked if no recording.
- Motion / Alarm
permanent record if in Enrée Alarm tab "Manage alarm" checked if no recording.
- Motion & Alarm
No recording.
Motion tab: NVR does not remembers the settings when I return to the screen: the settings are those defaults.
Standard Error video tab: NVR does not remembers the settings when I return to the screen: the settings are those defaults.
Mask tab viedo: NVR does not remembers the settings when I return to the screen: the settings are those defaults.
Alarm tab
- Grafted Alarm: Alarm Input: 1 Address: local (real channel of the camera)
Alarm Input: 3 Address: 192.x.x.x (real IP address of the camera) ??
When I validate the changes "Save successfully OK": in fact not taken into account.
Operation with HD-NETWORK ditto
System Management tab
-Storage Management: When I click "Setting" response "Success" !!! but nothing else.
How to make this device work properly?
I updated the NVR with the same firmware version: no change in the operation.
Translated with an automatic translator.
Thank you
