RickA

Have you gotten this set up and working yet? Did you check out the port forward site? how about the sticky on port forwarding?

Was that installation done by a certified electrician?

You need to port forward 5550 or 5500 whichever it is on your router also.

What a shocking developement

What about port 5500 for remote?

4. and that you have recieved the complete download of the file

check out portforwarddotcom, they have some good info on doing port forwarding on different routers.

Have you set up portforwarding on your dvr? Does your DVR require you to use a client software to view?

Your best bet is to check for a dealer near you and have them show you some demo units, most surviellance DVR's will have BNC inputs so you will not have to change that. For any recommendation's you will need to provide more detail as to what you are looking for IE, pps,record quality, networkable, length of recorded data, etc... Hope this helps.

Hello Victor, welcome to the forum.

Hello and welcome to the forum.

We just previewed the Apex from Nuvico and they are very nice units and they have a pretty good support team too!

http://www.cctvforum.com/viewforum.php?f=12 Try checking out this thread for general information on networking.

Hello Trisha, welcome to the forum.

After doing the switch a few times, we could see the resolution change, but it is so rapid and the images are really sharp.

Has anyone gotten a look at these yet? We just had a look and they seem to be really good units. The AP-D1600 that was pesented will do 30pps at 720X480 record and p/b and has the ability to handle four monitors,and they are completely programmable, looks like Nuvico has made some great strides forward with this new DVR.

You are not going to get any distance on 12vdc, will have to keep your power close to the camera or make sure you have a power supply that gives you 12vdc at the camera.

Depends on camera settings and specs, we have one that we tested that if the switch for day/night is set to day and there is light it will show color, it has to be very dark before it lost all color.

I don't have any experience with that DVR, but is there any item in the menu to set the camera's to covert, or to set them to zero, the DVR's that I work with can and do show both spot and vga monitors at the same time with menu proramming to display the camera's you want.

Thanks for the reply.

Hello Ronnie, welcome to the forums.

Hello and welcome to the forum.

Hello and welcome to the forum.

Post subject: CCTV_Suppliers wrote: valboosky wrote: 2.2 to 2.59 requires no hardware change at all May be... dependent on the motherboard that the original system was built... The issue are the drivers that 2.59 may not recognize. The only way to confirm this is to perform the upgrade... but I rather be cautious than sorry... The best approach is the exit the system, go to your desktop and confirm the minimum requirements for such upgrade before doing it... and if you want the exit code, send me PM... 2.2 to 2.59 will also require no SW key if you run the upgrade. You missed my point about the SW key... If he crashes the system and does not have restore CDs or the SW key vs. the MAC address is not clear or missing, he is basically hosed... we suggest this upgrade to anyone running 2.1 or higher, as it makes their intellex very stable. I work with these on a daily basis. Are you working for AD directly? If so, you know you do not see these type of systems much at all lately... As for the exit code, I suggest you call in to support. As I do not want to give it here. Val Val, you are missing my point... As many of these systems you saw, I do not think you had a chance to view this problem from end user stand point... Please find my answers to your observations above! I do work for AD directly. I you call AD tech support with your 2.2 version SW key and serial number they will generate a 2.5 SW key for you. 2.2 units do not have any recovery disks. If you want 2.5.9 recovery disks ( ghost image for each kind of motherboard) the part number you want is: 0352-0326-01 I do not mean to get into any arguments, I just know the product very well. Does that mean that cd will work with any of the motherboards for that version?

It's a good thing you didn't drop the toy!!!!