RickA

Same here, could not connect.

Hello and welcome to the forum.

Yep and a lot more info right here!

Depends on your location, would be best if you have a dealer close to you, then support would be close if needed. I have Direct lvs close to me in Louisville, and have dealt with them for several years.

CCTV Forums dot com? Just went to that site and looks a lot like this one, but is for the european market.

According to the part numbers for the camera's you have posted the seven mini domes require 500ma each and the cd-sd needs 1000ma with LED's on. Hope this helps.

Tried to access this from my apartment and insight bb, too slow, 1.9 kb, so there has to be a bottleneck in the qwest somewhere.

I would at least get started with the motion detectors and floodlights that you had mentioned in your first post and maybe run an alarm from one of the motion sensors to your flat.

The lux rating is also relative to the chip size and the best possible lens combination, why the need for a pin hole lens? Possible use a small bullet or a vandal proof dome. Could give a better determination of camera with some description of the location and what is trying to be achieved.

Usually best to do it that way, otherwise it just follows the same steps.

Try removing the software and reinstalling.

http://www.dolphincomponents.com/catalog-1.asp Try this for wire connectors, have used these for years. As far as doing a job for 100.00$ and then having to wait till they get paid.... for that money it would be nothing to do with work, just telling the rest what to do, and not being responsible for the job.

and usually a better picture.

http://wholesaledvrcardsDOTcom/index.html, THAT IS THE SITE HE HAD POSTED

Depends on the wire runs for the camera's, how far away will they be from the power source? If they are all under 94 feet and using 18-2 then you should be able to get away with an 8 output power supply panel. The one that will require the most will be the IR dome, when the IR led's kick on. Hope this help's.

Very good job Scorpion, information overload, yes we need to get this as a sticky and keep it , how bout it mod?

Hello and welcome to the forum.

check out smarthome website, may be able to get your answers there.

Have done d/l to flash and compact flash and to usb drives, depends on the dvr, have also d/l to laptop using crossover cable.

Hello and welcome to the forum.

Hello and welcome to the forum.

Hello and welcome to the forum.

Hello and welcome to the forum.

Hello and welcome to the forum

If its a 1/3" ccd will give a fov of 17', don't know if this helps.