-
Content Count
1,032 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by RickA
-
Does anyone have any experience with this DVR, just got one for testing. Let me know, thanks.
-
Appears to be a very nice unit, this unit has directions for replacing hdd and also adding extra hdd. Has been recording for a week and has not missed a beat. So far so good.
-
problems with install speco dome camera
RickA replied to VScope's topic in Installation Help and Accessories
Check BNC connections at camera and at DVR, use test monitor to see if video is present at DVR end. May need to reboot DVR to re establish connection. -
Do you have playback at the DVR?
-
Hello and welcome to the forum.
-
Hello, and welcome to the forum.
-
Tried to look up on the site, could not access the manual,http://wwwdotacutvistadotcomdottw/Indoor-PT.htm# replace dot with . Usually the address is determined by dip switch settings, but not having worked with this camera, I don't want to guess. Try contacting support, maybe they will send you a manual, maybe in pdf by e-mail.
-
Not much into doing the card installs, usually do standalone dvrs, so I have no opinion on the different cards and software. The RCA-BNC adapters usually work good, better with RG-59 with BNC. Hope this helps.
-
Welcome to the forum.
-
Altronix Power Supply Board Mounting with Tape Question
RickA replied to moe's topic in Installation Help and Accessories
Usually place the new card on the door when expanding the altronix, so make sure the placement is not going to make contact with a possible "short" when you close the door. -
Altronix Power Supply Board Mounting with Tape Question
RickA replied to moe's topic in Installation Help and Accessories
As long as nothing protrudes through the double stick tape, do not want any potential shorts, and make sure that there are no contact points on the cb. -
According to the website and what you have the computer is more than capable of running this system, check to see if the card was installed and the capture card drivers are loaded. Welcome to the forum.
-
Good looking install, that shot looks good even with the high beams.
-
To much going on for the end of the week I guess, we have a good one on our site, the PVBHRDNDV-36IR. Hope this helps, have a good weekend,
-
Well we are coming into the home stretch, one more week, hope to see more entries. I would like to see Pegasus sponser some more of these contest. It's a good idea to have a way to say Thanks to all who do the day to day for the cctv industry.
-
Don't know if I looked at the right camera but the Sony 473 specs seem good and should work fine for the application that you have described, hopefully with varifocal a/i lens. Good luck,
-
What kind of camera, dome, bullet? Inside or out? Have had some that the dip switch settings will give a water type image in low light.
-
I know this is a Digimerge system, but someone must have some opinions?
-
Know what you mean Rory, at my age am lucky to be able to see the end of my nose!!!
-
The war was already started, and a little unprofessional from the sounds of it.
-
Inexpensive system replacing a VCR, rest of the system is good, just plug and go. Not my favorite, but if it is the customer's request.
-
Hello, welcome to the forum.
-
If the power light is flashing all the time, then you are not getting any signal, try connecting with a different source. Check your connections might be loose.
-
Hello, welcome to the forum.