coolie11

Just buy L access point that agrees with your wallet.

Post a screen shot of the GUI.

It's a bad HDD.

Power cycle the Camera and all the info you need will be displayed at bootup.

Try 697408 for today 04/08/2013 The system should also have two Admin Accounts as follows: Username: admin. Password: admin. Username: 888888. Password: 888888.

Did you get this far without a password?

To view the cameras on your iPhone, you will need an App. Which one, I have no idea, that model number doesn't return anything on Google. If you have a manual check to see if it support iPhone and what App is require.

All Dahua NVR's can record at Maximum 120FPS at 1080p at a lower bit rate which is not true 1080p. For true 1080p you need 4096kbps. So you can get max channels as follow: 4ch NVR = 2 Cameras at 1080p 10 FPS Maybe 15FPS 8ch NVR = 4 Cameras at 1080p 16ch NVR = 8 Cameras at 1080p

That's a default setting which probably reverted when you did the upgrade.

I won't recommend it for newbies to technology. PM

Have you found one tha will work in -30c

Dahua DH-IPC-HFW3200CN Power Supply DC12V(AC24 optional), PoE(802.3af) Power Consumption <10W Working Environment -10°C~+60°C, 10%~90% Ingress Protection IP66

"All my installs are for independent mom and pop stores and many times they have never used a computer before." Not Dahua Clients. Where are you located?

"I'm new here in the forum" Welcome. If you want to stay here don't start off by hijacking other peoples post.

Problem solved.

JUST ASSIGN THE DVR A STATIC IP ON YOUR LAN AND PORT FORWARD THE REQUIRED PORTS IN THE DVR TO THE ASSIGNED IP ADDRESS IN YOU ROUTER.

Post a screen shot of the GUI.

Are YOU trying to connect to the DVR or iVMS?

are you sure 100% they work together? "I tried hooking up qsee camera to swann & vice versa with no luck in both of them working."

Looks rge way it's supposed to be. Try without Server Authentication. Try this as the Smtp Server: 174.194.76.108

Can you post a screen shot of the local display? What monitor are you using? What connection type are you using? If VGA try and match the DVR and Monitor resolution (1280X1040). How does it look in the web browser?

Ch 10 is not view-able locally? Did you enable in, under remote devices does it show as connected? Under user account, is Ch10 enable for monitoring? Can you connect directly to the camera?

I have no idea, never used it. (PC Guy) You can register with them and get support via email. You will also receive updates/findings by other users via email. I've been following them for a while now with the intention to try it out, but never got around to it.

You said Min not Covert. These are the same size as a gulf ball. You can try the pencil type cameras, they are about 3/4" by 2". Did a couple for a customer and it turned out great, we drilled into the Pergola and painted them the same color so you don't even see the cameras.

C&P from another site? Here are the steps: 1) Get a new IDE hard drive. From what I read, I would stick with a 160GB or less, and an 8MB buffer or less. 2) Connect the hard drive to a PC, and power up the PC. 3) In Windows Disk Management, create a new primary partition on the drive, using all available space. 4) Use "Fat32Formatter" to format the disk. 5) Shut down the computer, disconnect the drive from your computer, and install it into the DVR.