coolie11

Hoping to start this thread for users / installers to post info on the best nightvision camera they have found. Mainly in No Light environments. I'm tired of buying and testing cameras based on manufacturers specifications then to find out they don't stack up. I recently did an install with 12 Speco HT-650IRVFHQ which turned out to be a nightmare. The customer is totaly unsatisfied and now I'm out of budget.

Hi All, I'm attempting to unbrick my camera IPC-HDW2100 via TFTP method after an unsuccessful firmware upgrade. I have 9 of these and all the others upgraded fine using DH_IPC-HX3(2)XXX_Eng_N_V2.420.0000.0.R.20140414 except for 1. The following is what shows up when connected via serial: Puttty:- Õëy½Þ¯UÛ ¿£75A-#3!A7;==£±£åëg!=7¿=77¿åëg!=7-#1¿«ïy½«ÓÑÔ¿9!#¿5955757£åë®j:ªºú»!¿15¿-#3!£åë¿åëY=¿Y_m¿e5%! ¿-79!75¿'åëa¿¿¿5'åëu¿¿¿5'åë]Ñ©Ú#5¿_oM¿qucu[my¿§-7åëQº=£1/¿1=5=-!I 5¿753='¿-%=15åënnÛ ££¿!m_¿=77¿-¿ 5¿¿¿}[e¿g-#¿i5'¿m%=15¿¯#9!%57­åë¿¿¿w==¿Y-#9-A5¿{åë¿¿¿m%=15¿W -#1¿y/59)%¿£££¿¯ºú»õ=¿y[yåëu[[a[¿9=#±¿15¿)5'¿-%=15½åëwo{aaW¹¿ Any idea what mite be going on here? Any assistance will be greatly appreciated. Thanks

Whats the current date and time/

You would have to upgrade the DVR also.

You are right. There is no point upgrading your cameras if your DVR only records at CIF.

"need code mster of dvr td2316ss-c" "all code of dvr" What do you mean?

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&cad=rja&uact=8&ved=0CFAQtwIwBA&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DUwEUstvDg7A&ei=pcosU-q9FbO80QH5_IDwAg&usg=AFQjCNHiLtdknsZLHYCwVyjgw5AXEiX0-Q&bvm=bv.62922401,d.dmQ

Did you try Google? https://www.google.com/search?q=22+awg+shielded+wire&oq=22+awg+sh&aqs=chrome.1.69i57j0l5.6942j0j7&sourceid=chrome&espv=210&es_sm=122&ie=UTF-8#q=22+awg+2+shielded+wire

yes. The Wireless Bulb CCTV Security DVR Camera set with AV-OUT is not a DVR. It allows the transmission of Audio/Video over a wireless signal to Viewing/Recording device.

If you are satisfied with the daytime picture, installing floodlights (NO IR) would solve your issue, other wise don't waste time and money on another analog camera. If you can fit the bill look into upgrading to megapixel cameras, you wont be disappointed.

Most Capture cards are not natively supported by windows. Did you install the Eyemax software?

1. You can use 2 Standalone Dahua DVR's recording independently with SmartPSS for local monitoring of both systems (PC REQUIRED) (Cheapest Option) 2. You can use 2 Standalone Dahua DVR's recording independently with 1 NVR (NO RECORDING) for local monitoring on TV (NO PC REQUIRED) 3. You can use 2 Standalone Dahua DVR's NO RECORDING with 1 NVR for RECORDING and local monitoring on TV (NO PC REQUIRED) 4. You can use IP Cameras at both locations with 1 NVR for RECORDING and local monitoring on TV (NO PC REQUIRED) (BEST QUALITY OPTION) 5. You can always mix-n-match devices to accomplish your ideal install to satisfy quality and budgetary requirements. 6. Any manufacture DVR's/NVR's with CMS Program to view all cameras at once or IE for one system at a time on Laptop.

I was referring to the NVR Firmware. Thanks.

Do you have the NTSC Version of this Firmware?

Your configuration looks correct. Try reducing the Extra Stream, smoetimes the mobile phone bandwith can't negotiate the traffic properly. I have a couple of htese setup the same way with no issues

Post a screenshot of the network setting page and your router port forwarding. Does the user account you are using have monitoring rights?

Did you set the Camera ID's?

Are you using the onboard VGA? NV6480EXP System Requirements CPU: Pentium® 4 3.0 GHz or higher Motherboard with Intel 915, 945, 955, 965 Chipset (VIA/SiS/Ali Chipset motherboards not supported) (Recommended Intel, ASUS, Gigabyte motherboards) OS: XP Professional (For HT) RAM: 512MB minimum PCI-Express x 1 Compliant HDD: 120GB or higher CD-ROM/DVD-ROM 32-bit high color SVGA graphics card with at least 128MB video memory and DirectDraw® / YUV Rendering Capability (AGP Recommended) 10/100 Base-T Ethernet card Sound card and speakers

Password for 04/16/2013 = 394816 Password for 04/17/2013 = 856992

Did you use the TCP Port for the Mobile Phones?

The Prolink H5201 is a DSL ROUTER You need to put the Prolink in Bridge mode or configure the Linksys to act as a switch.

Post a picture of the login or info screen.

When I power cycle all the camera does is run through a about a minute long tour. Doesn't it display the settings onscreen?

...."L" ? Any

Use Preset 95.