tekworldinc

Ill just use an old school AM radio to locate the interference.

So as I thought, replacing the coax wouldn't make a difference? The interference could affect a new cable. Is there a device to locate interference?

I viewed the camera (standing on a ladder right next to it) with my wrist monitor and it was clear. The interference wouldn't effect it the same way?

yes yes and yes.

It's commercial off a roll not from the prepackaged kits. Installed by someone other than me.

Not sure about that. Im just going to change the cable and use mine. I just didn't want to replace the cable and that not be the problem. Thanks.

Standard black rg59. Should I get the plenum type?

I tested the camera on the existing power supply. I just disco'd the coax and hooked it up to my mini cam viewer and the picture was clear as a bell.

Good day, I am working on a camera issue for one of my computer customers. I replaced both bnc connectors and the camera checks out fine. I don't see anything wrong with the cable line either. Is there an interference issue? There is some electrical conduit and lights very nearby this camera. It's mounted to a thick wooden store front sign. I want to look into all options before I replace the wire. Thanks in advance for your help.

I have an installation that I can't use a dome camera (outdoor) or standard bullet camera. It's in a brick facade over an entry door with only a couple inches of space to mount the camera. It's an RG59 siamese connection hooked up to a Digital Watchdog vmax h.264 dvr. Also I need to hide the wiring in the mount or something if possible so i cant be tampered with. Any suggestions? Thanks.