aquamon

Looks like your "monitor" is out of range. Use HDMI cable/TV to access or try a different (higher resolution) monitor.

Dump the software you are trying to use, use the NVR/DVR's internal software for setup. View through web browser. Your software is apparently fake/nvr unit clone [9104]. NVR home surveillance systems are generally wireless, tend to be easy to set up, can be accessed through a web browser.... Well, I may be wrong on the "internal software" part... Maybe too far from server if wireless? Enter router (none stated & probably why the xxxx.1=conflict) and see what "DHCP" is assigned. May also try ipconfig in Windoze.

Maybe you have the wrong forum as a search indicates nothing...

I believe you have answered yourself... CDMA is not that great with latency, I would also reduce FPS.

Glad you got it working! I do see the pictures, now - I guess I thought the post had ended at the extra large Ad and didn't scroll past it. Could you post the numbers on "the chip"? Really got my curiosity going, now!

http://www.hikvision.com/us/faq_93.html Q: How to configure the HDMI and VGA to output independent display? A: This option is only available for the 90xx-ST, 96xxNI-ST/RT and 7716NI-SP/16 series with firmware v3.0.2+. Log into the DVR/NVR locally, Go to MENU, select SYSTEM CONFIGURATION and then select GENERAL (on left side). Under MORE SETTINGS tab, make sure the option “Enable VGA/HDMI Synchronous Output” is unchecked. Maybe that helps?

I believe the ISP in India changed his Internet Addie. I believe the ISP in the USA blocked his "No-IP"... "Let's make the Internet GREAT, again!" You may try taking control of the "host" computer in India via "Microsoft Remote Desktop Access" to figure it out. You should be able to see your cameras' this way, also (just as if you were there). This way is much better and "safer" than using any "No-IP", IMO (even though it's Windoze). Also, I don't think two people may be connected at the same time through "No-IP"? I'm not sure on this last part.

Glad you got it working! I do see the pictures, now - I guess I thought the post had ended at the extra large Ad and didn't scroll past it. Could you post the numbers on "the chip"? Really got my curiosity going, now!

I rest my case. " title="Applause" />

Could you post the link with the picture of the chip? I didn't see it. USB Hard Drives are very unreliable on Windoze. Are they formatted to NTFS?

https://www.google.com/search?client=ubuntu&channel=fs&q=dynamic+dns+malware&ie=utf-8&oe=utf-8 [1] https://blog.opendns.com/2013/04/15/on-the-trail-of-malicious-dynamic-dns-domains [2] I don't use Windoze, usually [3] I don't like installing unnecessary useless software - I never got it to work [4] Static I.P. method is quicker/fastest streaming, cutting out longer & unnecessary/unreliable internet routes; most likely, on the other side of the Globe - streaming completely around the World ~ 25,000 Miles [5] My opened ports are only known (basically) to me!!! [6] "Host" computer must be ON and communicating with Domain, constantly [7] Is IRRESPONSIBLE internet usage as an Internet User after the knowledge gained, Here-In [8] Have Fun!!! Now, tell me any advantages of using "your method" as a member of this forum other than: "ease of use for BASIC Windoze User": your customers. Does the DNS site ITSELF do any type of video compression, or anything to aid in the faster streaming or anything "advantageous/beneficial" to the stream or "user" as in Reduction of BandWidth??? Yes, I am a new DVR "User" and may not know many things; so, enlighten me... Sheesh; after this, you should be making more $$$ as your customers read this:- asking YOU to switch them over! BTW, step 5 in last link (above) should read: For this example, the address would be...183.38.7.205:3333

I would love to help "the Church" but am afraid of being asked for "charity". You talk of Audio, Loudspeakers?, and Amplifiers. I would proceed with extreme caution. A recent search shows mp4 format recording. History. Personally, I would just add speakers to the other room straight from the amplifier for Live Audio; you already figured out the rest...

It's part of the "Island Culture"; just accept it, maybe planting some other "Herb", instead...

Reformat Hard Drive? Your CPU apparently doesn't like what is going on and so your OSD is turning off (freezing: software/memory bad). A simple remove/reinsert on mouse should indicate if the "mouse was lost". In that case, you need to install a feline to catch it. If that is the case, I would recommend installing a Margay; not only will it go after your "mouses", but also rats, scorpions, bats, roaches, etc... Worst case, your CPU is already fried. Plug hard drive directly to Windoze® and see if it is recognized. Have you tried with Hard Drive disconnected???

Best ask Expert tomcctv (or another cctv pro) directly, I am completely lost in what you are requesting. Sorry.

Stay away from dynamic dns How does "static IP" save you from Mirai? You are right, but it reduces the risk as the website/dns program itself is...REVEALING.

"As a courtesy to our advertisers, please do not post links when recommending products; just post the recommended products name/model number etc.. Of course, we encourage a search of our advertisers sites first for any recommended products mentioned in threads"

Sounds like the same clone: remove battery, power up, power down, install battery, power up. Your date is now 2000 01 01 6:00am And, your left hand is touching your face... If that doesn't do it, repost.

Stay away from dynamic dns due to mirai! Use the static...

Check my last post which I must give credit to at least 2 people in here (alanduy1 & tomcctv): Bad Board! Do you have any heat sink inside the unit? Any fan?

As I found out with my LiView. The "CPU" has no heat sink on it!!! Hi3520DRQCV200 It is a well made COPY; otherwise, I must admit! It has 3 power supplies using the FR9886. One "was" 3.3V, the other "was" 5V; the third was down to 1.1V which I found rather unusual. Sure enough, isolating it with an outside source of 1.2V, was drawing 1Amp! (0.2 Amps normally; even with fault). The CPU was now the only thing getting HOT! Then, it blew my "protected" SMD rework station's 15V/1A power supply... In my previous comments, LiView & Elec seems to be the same, one guy had (YouTube) stated problems with hard drives'. Even though 12V is supplied directly through the adapter port to the Hard Drive power source, I suspect this is a "bad rail" - ?maybe a second 12V "regulated" supply?...to the "CPU". So, I have just bought another "Chinese crap" just for the hell of it! I think I'll order the CPU and fix myself (non-BGA) (LiView), should the seller not respond (already received 8 "away" ebay messages)... This time, I will open, make sure the "CPU" is well "heat-shielded" and put a small 12V brushless fan from an ATX power supply or so... Old post but relevant update - I have never experienced a bad CPU until now, EVER!!! Makes sense, unable to telnet log-in, etc.

The moon is good. I like the moon. It is RoUnD. And Silvery LoOkInG. I also Like Boxes. I bought a LiView just for it's BoX! Boxes are good! I like boxes...

The problem is, in UK, everyone is an Injuneer!!!

I dunno, but I like the "code", may I borrow?

Maybe b'cause you post a pic of the user software, not the DVR?