fiona_c

HURRAY !!!!!!!!!!!!!! I GOT IT GUYS !!!!!!!!!! WOOOOOHOOOOOOOO im so dumb !! my remote control has a button marked AV, which takes me to RGB SVHS AV1 AV2 and the one it works on is f-AV !! I always moan about blonde jokes but they r true im so dumb hehehe Rory Babe thanks for replying and helping me out xx mwah xx and you baywatch ( u got red trunks and buff body?? RRRrrr ) thankies guys xxxxxxxxxxxxx Fiona xx

ok, when i try to find my av channel i dont see the blue screen, only snow, on menu in remote i found av-2 output , i can change this to av-1 or tv. Should i set channel 0 on av-1 and try to tune it that way? i have noticed on the tv when searching/ tuning that the frequency goes up to 899 on UHF but i cant seem to get 900 !! and thats what range the manual says it opperates on.. scan frequency is 50hz frequency range is 900mhz to 1200mhz should i be tuning my tv to 50 or 900? bearing in mind tv doesnt say next to the number if its frequency range or scan frequency... arghhhhhh help me!!!!!!!!! im goin mad The cam and reciever were bought over internet, guarantee says units were checked b4 shipping. My tv is a carppy make well rarley heard of its a lodos 28inch www.lodos.co.uk is is just a case of my tv not being able to tune to correct frequency for cam? i have a link to an identical unit i bough http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3862113803&ssPageName=ADME:B:RECO:UK:2 Im tearing my hair out here guys Fiona xx

Hi Rory Its connected into my tv via the yellow socket, the one next to the white and red ones. Although its a black connector on receiver which plugs into the yellow socket but it has yellow one on box, i dont think i have wrong connector its just a diff colour. Any ideas where im going wrong rory babe? fiona xx

Hi everyone I need some techy adivse PLEASE! I have purchased a small pinhole camera and reciever for me to place at my front door... to see whos at door basically, anyways.... its a pal uk version, in in uk hehe.... scan freq 50 hz res 380 lines 3 lux freq range 900mhz-1200mhz ihave all cables connected with batteries etc, BUT I CANT TUNE IT IN TO MY TV!! what am i doing wrong? Its just a standard 28 widescreen.. iv been thru vhf1 vhf3 uhf trying to tune it in, receiver has a tunning knob on top im turning it whilst scanning trying to tune it into tv but i just cant do it,, do i need a monitor or diff tv? Please help boys Fiona xx