Jump to content

rdawg

Members
  • Content Count

    54
  • Joined

  • Last visited

Everything posted by rdawg

  1. Hi, I'm looking for a good quality color bullet camera. I'd like to stay around $60-$80 if possible. The camera will be used primarily indoors at a range of up to aproximately 40 feet. Any suggestions? or if you can post any pics from your bullet cams Thanks!
  2. Hi, Get an American Dynamics Adtte16 controller. On the 3 lights you should have a yellow blinking light(this is verifying that your communications are working correctly). Also make sure your jumper pins areset to "sensornet" configurations.
  3. Does anyone out here have or know of anyone i can purchase a Sensormatic speedome EIM(external interconnect module) from. Any help would be greatly appreciated. (IT IS A SMALL PLASTIC BOX THAT THE CONTROLLER PLUGS INTO)
  4. I have several sensormatic speedome 2000's available for sale. They have no way of being tested as i do ot have a controller to test them. Therefore i will advertise them good for parts. make me some offers. thanks
  5. i am looking for a sensormatic speedome 2000 ptz camera that is working condition. if anyone has any that they'd like to sell let me know... thanks
  6. Guys, I head that its possible to hook 2 box cameras up using 1 cat 5 cable. How is this done?? thanks
  7. rdawg

    cobradome

    i am looking at a sensormatic cobradome(ptz) does anyone know of a wiring diagram of how to hook it up to a controller? also wil the Adtte 16 controller work for this particular model? thanks
  8. Guys, has anyone ever been able to get any"free samples" pf cctv cameras?? if so how do i go about trying this out? thanks
  9. Need some help. I have an old pelco s2000 back box( it's the 2x2) that fits flush in between a ceiling tile grid. This is my sproblem: 1. i need to somehow drop this backbox down 4 inches (so somehow i'll i need to construct something) Does anyone have any ideas or drawings of what they are talking about. thanks
  10. I have a sensormatic speedome 2000 ptz that is in need if repair. Does anyone out here repair these cameras or have any that they would be looking to get rid of????????? thanks
  11. I am trying to catch some associates in my warehouse. The area i'm targeting is very dark and i think i may need to use a ir camera(small one) However this is the problem in the area where i will be putting it i'm afraid the ir lights will be too noticeable, Is there a way to disquise the ir lights from being noticed?? If i put a black rubber washer in front of the ir lights would my picture be ok??? thanks guys
  12. I am hooking up a copuple of box camera in a retail store. They will be placed relatively near each other but here is my question. 1. I have siamese coax connected to the one camera(cam1) but want to know if there any way that i can connect another camera (cam2) to the same coax as the other camera(cam1 ) Please note is there any way that i would be able to view both cameras on a monitor in my office and switch between the 2 of them?
  13. Guys i need to put a little camera (i'll probably use a wireless ir camera) in a dark area in my warehouse. Problem is it is pretty dark and i am afraid that the ir lights on the camera will be very noticeable. Question is there a way i can disquise the ir lights without interferring with the quality of the picture???? thanks for your thoughts
  14. I'm in need of a sensormatic speedome 2000 ptz camera. Does anyone have any or know where i can get one thast works..... Thanks for the help.
  15. Guys I work in loss prevention and want to install a couple color box camera s shooting down the aisle ways. The ceiling is a suspended ceiling with ceiling tiles. I don't have any more domes around the office and want to see if anyone has any ideas if there are any ways to make a dome. I'd like it to be very discreet if possible. Thanks
  16. Guys i have a ganz color camera CHL 401 . My questiois this. It is place along a back wall show seems to show alot of white in the picture. I noticed on the settings there is a "blc" what is this setting for and what will happen if i switch it to the n position?/ thanks
  17. Guys i have 2 pelco ptz cameras that are running into an a/b switcher then into the coaxitron controller. My dillema is this I want to add a 3rd pelco ptz camera but i only have the 1 controller. IS THER A SWITCHER THAT HAS 3 SWITCHES(EX A,B,C)??? ANYONE HAVE ANY OTHER IDEAS ON WHAT I CAN DO??? THANKS
  18. Guys i currently have some typical box cameras hooked up throught my store ussing siamese cable. I want to put more cameras in but i don't have enough cable to run all new lines for the cameras that i want to put in. Is there a way that i can splice into the video and power from the other cameras? i was thinking of a switcher but i don't think that will work since i need to be able to :switch" between the cameras from my office. Any thoughts on what i can do??
  19. This may be the wrong place BUT........ Has anyone ever used a slingbox(its like a cable box that lets you transmit tv signal via your laptop? i need some info.
  20. i have a wirless camera(covert) that has a small 9vlt battery hookup. i also have a 9vplt ac adaptor that will work in place of the battery. HERE IS MY QUESTION I WANT TO USE THIS CAMERA PROBABLE 300 FEET FROM THE NEAREST OUTLETIS THERE ANY WAY TO DO THIS??
  21. Anyone ever used a "slingbox" to watch video on their laptop computers? What is the best and easiest way to connect to the internet via your laptop? I'm not in a good wiifi area? Any other infor is appreciated.
  22. Does anyone know where i can get some good quality pelco ptz cameras. I'm looking somewhere in the area of $500 a piece. Any websites would be greatly appreciated.
  23. i'm looking for a nice quality pelco ptz camera for qaround $500 or so Does anyone have any for sale or know of where i can get a good deal??
  24. i saw some info about when removing the unicard board from a sensormatic sopeedome that i should use a grounding strap?? What is this grounding strap they are talking about? Can i make one? I don't see anything resembling one attached to the camera? Do i really need one??
  25. I have a sensormatic speedome 2000 ptz camera that needs fixed. Does anyone know where i can get it repaired besides Moore's electronics (They are outrageous) The problem is i have no control of the camera via the controller.. The camera's picture is fine and it goes through it's rotations but i can t control it. DOES ANYONE KNOW OF WHAT DEFECTIVE PART COULD CAUSE THIS PROBLEM??? tHANKS GUYS!!!! ps ANY WEBSITES OR HELP WOULD BE APPRECIATED
×