thewireguys

No I haven't used it yet. The camera is HUGE and I though the price was high.

Yes I use it all the time.....go with Leica they are the best. The one I have can do 600+ ft outdoors

No

ComSurv.... do you always use Mobotix's vms software for your installs?

any time frame on 4.6? Now that I know I am only getting 3fps, I am wanting to upgrade my analog cameras even sooner I was told today "this week"

I dont really need 30fps or anything, but something above 3 or 5fps would be nice. Im fine with somewhere around 15fps When connected to exacq, i am getting 3.4fps all day long on all four cameras. Thats a bit low for my preference. TWG: What do the R and the D stand for in rfps and dfps in exacqvision? R= Received D= Decoded

I think Stardot does.

I know of 2 encoders that will do 30FPS all channels D1. Axis Q4704 @ $1100 and Avigilon $350 ish

Just to verify, Retail or dealer price? Everything I see online is dealer price at under $1000. Retail well under $1000.

Is that in 1080P or 4MP mode?

When you are viewing the encoder directly you are only viewing one stream. When you have Exacq connected Exacq is pulling 4 streams.

What happens when you switch Exacq to MPEG-4?

^^^ Yup and they are more

Yes there is.

Sanyo Heater/Blower doesn't get power from POE. Most IP domes do not.

So is there a way to disable the second stream, and just have ONE stream going to exacq to get my 20fps? I wonder why you can get 30fps and i can only get 20... are you using motion JPEG or MPEG4? also, are you recording in 4CIF? Default that encoder.... Test FPS again... then reconnect to Exacq and test FPS. After it is reconnected to Exacq look at the bottom right of the image you will see the bandwidth coming from the server. Click on that till you see "rfps" tell me what you see.

Do you mean disconnect it from exacq and then look in the AXIS setup page and tell you what it is set at? It is "set" at unlimited. Or do you want me to go to the AXIS setup page and do a test of what the actual FPS reading is? What do you mean when you say disconnect it? Unplug my exacq server from the router? or do i have to actually go into the exacq software and delete the AXIS server altogether? un-check the encoder from the "IP cameras" page then log into the encoder and tell me what the FPS is in the live view.

Something is not right your FPS should be much higher then that. That is slower then the 240Q. Please disconnect Exacq from the encoder and tell me what the FPS is at.

According to Exacq it is a limitation of Linux. The NIC will show up in Linux but in Exacq it has all 0s for MAC address.

I have installed hundreds of DSC panels and they can be hard at first to program but I can program with my eyes closed now. If your gonna program via key get a LCD version not the LED. Much easier to program.

Bingo

No key needed for one channel To get the software you need a dealer Please PM me your email and I will send it to you.

You contact your dealer and there is a fee from Exacq to transfer licences to a new NIC

Alpine can you confirm frame rates with Exacq? .

It's about time ONVIF was more than marketing hype. Best, Christopher I'll believe it when I see it