thewireguys

I have the same camera and have it working with ACC 5. There is specific firmware on the FTP site that works with Avigilon.

Do you have a link to this firmware? I just checked the FTP site and that firmware was not listed.

Do you have a link to the camera that part number doesn't show up in searches. Do you have ACC 5 configured to record on motion? Do you have motion detection configured on the camera? What verison of the firmware are you running on the cameras? Have you spoke with your integrator about this issue? What have they said?

I think they are going to have a very long and uphill battle to win customers and integrators back. Most Mobotix integrators that I know have switched to other solutions and customer have been burned so they are also looking at other solutions. I did see the canned demo of the new VMS at ISC. It looked ok but again it was canned and not live from cameras.

We have been installing them in police interview rooms...

The Hikvision DS-2CD6412FWD-10 1.3MP is out as I have installed a couple already. If your front door is covered I see no reason why it will not work as long is water will not hit the lens directly I see no issues. FYI the Axis outdoor version is NOT a pinhole lens and it SUCKS in low light.

The DAQ stuff looks nice.

We just installed Avigilon's new access control solution ACM. Right now these is geared towards enterprise customers but it is managed via web browser and currently uses Mercury controls. Soon they will be adding HID and other controllers to the supported hardware list.

I know a lot of people have been asking for non Active-X browser support and now it's here. The latest release of Avigilon ACC 5.2.0.20 adds HTML5 support in the Gateway server!!

most cameras we have on one PTMP link is 6 Avigilon 5MP bullets at 7FPS. Rocket M5 with 2 NanoBridge M and Toughswitches As everyone else stated shielded cable is a must and RF Armor is very helpful

If you are talking about Mikrotik SXT vs Ubnt nano, I have been told SXT is ok up to 5km because it has strange beam pattern?! So I have always been looking at ubnt nanobridge. Now there is new equipment - nanobeam. If I ever do wifi link, its gonna be with nanobeam m5 300 Nanobeam M5 300 will be total overkill unless your doing a long range PTP link. NBE-M5-16, NBE-M5-19 will be used the most. The longest link we worked on was 37miles using rockets and RD-5G-34 dishes

Super "Advertisements and/or solicitations should only be conducted offline (email or PM's at invitation only). In other words, please do not conduct business in public forum posts. Any post of an obvious business nature will be removed by the moderators at our discretion. Please do not send mass PM's to the memberlist advertising your products or services. Repeated offenses will lead to banning without warning." viewtopic.php?f=34&t=3144

There is nothing out there currenlty that transmits the signal properly. That is not technicality true as HD-SDI is transmitted via wireless in the broadcast world.

To power Routerboard's wireless APs. They have a whole line of wireless gear like UBNT that is extremely powerful (feature wise) but not for a beginner user. -KNo1B7K-YY Routerboard/Mikrotik has some very powerful low cost routers which are very popular with WISPs.

You will be able to change the volume size but moving video can be tricky. I would try this: 1)Copy video to new drive 2)Power off machine and unplug the power for the old drive. 3)Power up machine and change the new drive so the drive letter matches the old drive. 4) Restart the machine 5) See if Avigilon sees the new drive as the old one. 6) If Avigilon does see the new drive then stop ACC5 server > click Storage > Change Volume Size If that doesn't work call support they are the best in the business.

I just heard something about this too. There is some backdoor access built into the DVR/NVRs and maybe the cameras. I am trying to get more info on this. If the US government can force CISCO and others to give them backdoor access there is NO doubt in my mind that China has done the same thing.

To make port forwarding alittle easier I normally switch the Gateway port from 80 to 38884. This way I can port forward the whole range 38880 to 38884.

^^ to add to Eric's info the defualt port for the Gateway/mobile server is 80 and 443

Those price lists are old FYI

Where are you located? Are you the end user?

We looked at both the 3mp and 5mp Hik fisheye and I was disappointed with the image quality. They had it running though on of there NVRS so we where not able to see the image directly. I still plan to order one to test since the people in the booth really didn't know what they where doing. I must add that the whole experience in the Hik booth was very disappointing. They where bashing all of there OEM partners and didn't offer any real reasons why we should buy Hikvision products over the OEM partners.

I am working on some projects where I need covert housings for cameras. Anyone have a supplyer for housings like this with the window behind the sticker?

You have the new Fisheye instock?

Let you all know... We will see it tomorrow!

This new Hikvision camera looks be much better in low light. 6 Megapixel Fisheye Network Camera Day/night with IR http://148.243.99.22/CCTV/HIKVISION/Hojas_de_Especificaciones/6362F-I.pdf