algarvepaddy

What options do you get when you right click the mouse? The person that installed the NVR software may have set it up so it can just be viewed as is.

If you or anyone else can work out how to secure Hikvision then please let Hikvision know. They would be delighted to hear from you. They are in big trouble at the moment.

Difficult to follow exactly what you want but if you are trying to get the same IP camera to show up on three different DVR's then normally that will work because the cameras are unlikely to be multicast.

Press "F" on the keyboard or right click the mouse and select "Full Screen" from the pop up menu.

Have used these many times and always worked perfect.

If you connect a DC 12v power supply to the power end on your camera it should work. If you want to send the power through the Cat5/6 cable instead(and the camera is PoE capable) then 48v power supply is normally used. 12v will not work through the Cat5/6 wires.

AHD analog is not the same as analog. Some AHD analog Cameras have three wires, one for power, one for signal and one with a small built in switch which sometimes can be pressed to force actual analog which will work with Geovision. Your best bet is to source a straight analog camera! Good luck

Ubiquiti are very reliable and well suited for CCTV.

Have you checked out Geovision? Worth a look, long time around and very reliable.

Geovision NVR software on a PC with ONVIF Cams cannot be beaten for motion detection.

You can only use Analog Cameras with the Geovision card. Sometimes sharing power supplies can cause problems. Thy giving a problem cam its own power supply.

Yes there is. PM for details.

Hello, It is difficult to beat Geovision when it comes to a setup like yours. Are you trying to get rid of local storage and instead transmit all data back to a central location? Regards Sorry, also meant to ask, are you using analog, digital or a mixture of cameras?

The problem's you describe are almost always power related. Try to power each of the cameras with their own power supply.

Try checking "Local Account Edit" to ensure they are ticked for display.