mikem

finally, I installed a new hdd (WD 250GB) and everything works fine. thanks all for your help!

hello to everyone. I have just bought my first dvr and I am very dissapointed. Firstly, I connected a hdd as a master one and a "no hdd" message appeared. Then I used the single mode and the dvr found the hdd. However, when I rec on the hdd, after 1 or 2 minutes a disk sccanning message appears and the dvr reboots. This continues and after the rebooting. the used hdd is Western Digital Caviar WD200BB. Can anybody help me? Thanks in advance.

yes, indeed. the HDD was formated in FAT32. In what format should I re-fdisk it? the fact is that I formatted it in the dvr.

Could you please describe me what you did in your case?

the fact is that I used this hdd with an external case as a bachup device and it worked without any problem. I install it in my dvr because I wanted to test the dvr.