_-0-_

Use IP setup program ver. 1.41. only. If it does not work: Default IP (after reset) is 192.168.0.100 (port 80), try to ping it, or open it in IExplorer (login/password: admin/admin) - PC must be on the same subnet, DHCP better off. Best of luck.

Hello, I am looking for new firmware (current firmware r3294 hw1.1 1.5.0.10 : ipix-cvd3000 - Thu, 15 Dec 2005 08:23:26 -0500, boot version: 3294) for IPIX CV-D3000. The camera manufacturer's Web site does not includ any informations or download link, helpdesk is not replaying .. I have problems with FTP uploading, I hope that upgrade will solve the situation. Thanks for your help _-M-_ Camera description: http://taisecurity.com/product_info/CCTV/ipix_cv_dome.pdf or http://www.seattlesurveillance.com/pdf/ipix.pdf

I bought it in Czech Republic, short-term use, in perfect condition and even in the original packaging from the warehouse of the company after bankruptcy. Unfortunately, it can not connect camera to the ftp server (where no problem uploading frames of Vivotek and Axis cameras ), therefore I am looking for documentation and new firmware.

Hello, I am looking for firmware newer than r3294 hw1.1 1.5.0.10 : ipix-cvd3000 - Thu, 15 Dec 2005 08:23:26 -0500, boot version: 3294 for IPIX CV-D3000. The camera manufacturer's Web site does not includ any informations or download link, helpdesk is not replaying .. I have problems with FTP uploading, I hope that upgrade will solve the situation. Thanks for your help _-M-_

Inside Philips/Bosh (LTC 0809...) cameras is RS 232 connector too, is possible standard communication (with PC system) true RS 232, or I need BiPhase converter too?

Inside this cameras is connector RS 232, question is, if you need in this case Biphase convertor... For communication true 2nd one input ("BiPhase input") you need convertor RS232 -> RS485 and expensive RS485 -> convertor.