Mitch619911

Oh My God. Thank you so much dude... i went over your word and kept setting the controller to 001 and I set the controller to 90 and it works... dude i owe my life to you...

Here is the main brain I belive.

Okay when starting up the ptz camera it does it spin and boot up and on screen it says the Add 090 BR: thing in the first post screenshot

RS485, red goes to + and black goes to - How about the setup protocols Camera: 1 ON, 10 ON. Controller: PELCO-D, CAM: 001, BR: 9600. 1 ON = CAM 001. 10 ON = PELCO-D. I have tried PELCO-D and PELCO-P and all other BRs.

RS485, red goes to + and black goes to -

Yes the settings in the controller are all correct and setup...

Still not worked, I had it plugged for a few days and it did not reset itself. Still trying to contact the seller.

I opened the PTZ camera back up again and found that when I try to move the PTZ camera with the joystick, on the circuit board an LED flashes dimly!

I tried 90 / 95 / 99 and they did nothing. When starting up the PTZ (plugging in power) it spins around (doing its normal startup) and on the screen, it has the time-date/camera# and x1 (x1 I think is it's where it's zoom is) EDIT: speeds around > spins around

Call 90 or 99? As in 90 *call* / 99 *call* or just press them? (my dvr does not have numbers on it but I can plug in my joystick to PTZ) Thank you!

The "ADD: 090" is the preset I was trying to program in, I believe, on the dip switches I have number 2 up, and number 10 up. Address: 2 PELCO-D: 10 (on/up)

I have had my PTZ camera for a good year and ran it on 2 systems (old and new) just fine. I just installed the new system and hooked up my PTZ camera, it's been working for a good month, but now it has stopped. Here is what I last did (I think it locked it up by doing this) I logged on to their cheap Chinese made website 'xmyeye' and went to the preset area, added a preset (90) and tried to save it and start a tour mode, right after I put in the preset it made my PTZ camera bring up like a menu then at that point it stopped working (video works, no PTZ controls), I bought a PTZ joystick and hooked it straight into the PTZ camera, still nothing. Heres a picture of what the system said after I hit the preset: I have tried to factory reset the DVR, this did nothing but I did notice the preset stayed the same, my PTZ camera does not have a factory reset button (or any button), I took the damn thing apart looking for one, found nothing but circuit boards...Also, I left it unplugged for tonight, gonna try to leave it like that for a day or two, maybe it will reset itself? My camera: http://r.ebay.com/hqEnd3 My DVR: http://a.co/eOcQoQa My PTZ joystick: http://a.co/8NVG8sQ Thank you for any help.