Covisec1

I think I have my issue figured out. The Pan and Tilt motors are 24VDC and they do work with 24VDC. The 220VAC is just labled wrong on the drawing. I did have to take the Pan and Tilt apart and look at the motors before realizing what the issue was. This drawing seems to be an old drawing. Thanks for your help!

The voltage for the Pan and Tilt motor is 24VDC. I do not need the 220VAC terminals for the camera. What do you mean by conform? Are you talking about the NEC?

No I am not new to tech support. The control part is not a big deal I can build that. I just need to know what voltage to apply to the preset and the left, right, up,down control to make it move.

The customer already has the Pan and Tilt heads. They are using a controller to control them.

Yes I work in tech support. The relay did not come with the pan and tilt it is just a RS485 controler relay with 8 NO and NC cotacts. I am trying to use this to control the pan and tilt. This Pan and Tilt is for a special application and I have no idea what my customer is using it for but I need to make it work. The unit is supposed to be 24V the 220v side goes to the camera cable. Where do I get a manchester box?

So is the control 220V and not 24V? The RS485 is just a RS485 Relay block with NO and NC contacts. Also, what is a Manchester box?

Yeah, where the Pan and Tilts are going to be installed regulation is not a big deal.

Hello, I have an old style Pan and Tilt unit 24V made in Korea. Does anyone know how to hook this unit up? I am using a RS485 relay unit but I cannot get the Pan and Tilt motor to move. The schematic is in the attached file any help would be greatly appreciated. pt.zip

Hello, My name is Alan I work in tech support at Coastal Video and security and this is my first CCTV forum post.