seppec

Hello everyone. I am having troubles with changing my ip camera's. I have 3 annke i21g camera's with onvif and i have 4 cheap brandless onvif camera's. I contacted the seller to ask how to change the password but it does not work for me. I both tried the onvif manager software and the cms software. does someone knows how to change the password. Thank you!

The camera works fine bc's it works well on my dvr. It is a dark image but i can see what is going on but i can not see anything on the little display in the kitchen

I'll try it with a powered splitter. Thanks! I just took this picture when i was with the client. Is it a sign of a low video signal?

Hello, The dvr is from dalhua 4ch dvr the camera's are can280 - pal,cmos 1/2" The splitter has no specs it is just a t splitter (see picture) and the system uses coax cable. The lcd is just a small 9" lcd like they use in cars it has no brand.

Hello, Today I went to a client to replace a cctv camera that was broken. When I replaced the camera there was no signal on the little car monitor that was placed in the kitchen. There is a good video signal to the DVR tho so the camera is working. The camera is connected to a splitter in the attic and goes from the splitter to the DVR and to the car monitor. Why is there no signal on the car monitor? Are the cables to long? the video signal to weak? Thank you!

Hello everyone, I have 1 camera that i want to connect to two nvr's so i can watch my camera upstair as well as downstairs. I have one cheap chinese nvr from $25 dollars and i have a hikvision DS-7616NI-E2/A. I have an ip camera onvif 4MP and it connects great with my hikvision. When i try to connect it to my chinese nvr it shows me my camera when it is in 4 screen mode but when i go to 1 screen mode by double clicking on the camera there is a big red cross on the screen. Can anyone suggest me how i have solve this issue? Thanks!