executivecctv

I have a 16ch gv card and when i go to camera/audio install...audio is all greyed out! I have no idea what to do! Please help me if you can I will try anything at this point I have an audio install in the morning and now im screwed with no audio! Thank You!

I have a gas station that I am installing cameras for and now the guy wants to see his tape journal on the screen from remote view wants to see whats being rung up from home. He has a Verifone Ruby II Register...can this be integrated with any kind of DVR to do what he is asking??? Please help me if you can. Any Help at all is Greatly Appreciated!!!!

xx

OK...I installed a 8 Camera PC Based DVR in a Store and now the guy wants to put a tv hanging out front with 4 cameras showing on it. I used a KGUARD DVR Card...there is NO loop out like a linux dvr. What I am wondering is if i use a coaxial 2 way splitter on 4 of the 8 cameras and run the 4 splits to a multiplexer and then into the tv...WILL THAT WORK? Please Help if you can...I Dont know what to do. Thanks alot...Much Appreciated!!!

Hi, I have a gv-250 dvr and i beelieve everything is setup good. on local pc i can login through innternet explorer with local ip and view my cameras fine. from home i use ddns and when i input the same user name and password as locally i get login error. this is driving my crazy and i dont know what to do.. if you can help me it would be greatly appreciated!

what can I do to fix this problem? If i restart the DVR system it goes away but later comes back. green rectangle boxes covering the camera picture...what do i do???

Hey guys I just bought a roll of ALUMINUM CCTV CABLE...what do you think? I guess its just aluminum conductor instead of copper...would this work?

symantec corporate edition...never expires

Yes this is your best card...you can stack them as well as customize the software with your logos!

AverMedia NV3000 4CH Card Stackable to 16CH? 4 x NV3000 = 16 CH? Can 4 of these NV3000 Cards be stacked without problem to make a 16CH dvr? Please help if you can.

I had a camera that was working perfectly. I cut cable connectors off and pull the wire running outside back in side and left it inside rather than outside along the wall. I then ran the saimese cable then through the wall where the camera would be on the other side. Crimped on the connectors and the DVR says NO SIGNAL now. I think it may be a power problem but the camera was just on and working before i touched it. I tried cable trackers and tryed toneing the cable all the way accross and it toned (does that mean the powers good?) I am really confused any help would be greatly appreciated! THANKS

where can i get a camera mount for this dome?

c

xxx

WHERE CAN I GET THSES CAMERAS CHEAP?

where can i buy one of these? and how much do they run?