techydork

I think if you want cheap and easy then a standard analog bullet type camera would be the best bet. We use quite a few of them here and have cables up to 150ft on some of them. We just order ours off of Amazon. They have a BNC type connection for the video, but you can also get an adapter to make that RCA. camera - https://www.amazon.com/dp/B01420IG8G/ref=psdc_14241331_t3_B00RWO0DZ4 Power supply - https://www.amazon.com/EWETON-100V-240V-2-1x5-5mm-Certified-Transformers-Fits/dp/B01B2VGS7Y/ref=pd_bxgy_421_img_2?_encoding=UTF8&pd_rd_i=B01B2VGS7Y&pd_rd_r=181fdfe5-8924-11e8-80ac-3d674b63b869&pd_rd_w=dkYAf&pd_rd_wg=sS1Fy&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=3914568618330124508&pf_rd_r=5JN5Q8GQCY6V937PD8SV&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=5JN5Q8GQCY6V937PD8SV Cable with RCA to BNC adapter - https://www.amazon.com/dp/B0744F6CCJ/ref=sspa_dk_detail_3?pd_rd_i=B0744C77TQ&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=1713835751726239774&pf_rd_r=9RPAZ4KAQK8TYJXKW9QM&pd_rd_wg=ffd8r&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&pd_rd_w=qWjj0&pf_rd_i=desktop-dp-sims&pd_rd_r=4c00f8cb-8924-11e8-906c-89fc5d574e42&th=1 If you want a wireless camera that isn't IP based that could be tricky depending on the total distance from the base station to the camera and also how many trees, walls etc you have between them.

Hello all, we are looking for some help/advice on how best to power a Honeywell HDZ302LIW PTZ camera. https://www.bhphotovideo.com/c/product/1332161-REG/honeywell_hdz302liw_outdoor_ptz_ir_ultra.htm We were hoping to set this up on a remote monitoring site that will be 100% off the grid for a animal monitoring station that will be utilized by a team of researchers. the stations will be powered by solar and wind power. We are utilizing Netonix switches to provide connectivity and also supply POE to the cameras https://www.netonix.com/wisp-switch/ws-12-250-dc.html , they are designed for WISP use and do everything we need. The issue we have is we cannot get the cameras to power on. The switch will provide POE at 24v .75A, 24v 1.5A, 48v .75A, or 48v 1.5A. We have tried both 24v .75 and 24v 1.5A poe, and the camera will not power up. The cameras claim to work off of a 24v 3.0A AC power supply, or HiPOE. According to the documentation they draw a max of 32W without IR enabled, but I was told by a sales rep that we needed a 60w power supply. It looks to me like that 60w POE injectors out there are 48v. My question is can i send the camera POE @ 48v? Honeywell support is pretty much nonexistent if you are not a dealer or licensed installer. thanks everyone in advance,