highspeedphysics

Pelco CCTV Cameras and wiring for sale. These are working cameras, tested and removed from a business due to a upgrade. Reasonable offers will be considered. Located in Northern California, will deal with in person or pay by money order. Pelco Cameras – lens sold separately Qty 7x @ $50 each Pelco CCC1370H-2 MONOCHROME Qty 4x @ $75 each Pelco CCC1380H-6 COLOR $15 each with camera purchase 5 – 50MM Varifocal Lense. I also have some 4-6mm, 2-8mm ones.

I have some questions about Megapixel cameras. Can you use a regular 1/3" or 1/2" camera lens on a megapixel camera?

I bought a 16 port GV-650 card due to arrive in a few days. While I understand I bought a card capable of 60 FPS total. Would it be possible to define the frame rate for each camera as I would like to have one camera with 30 frames? Any ideas?

Conduit Rigid EMT Installation questions has anyone installed rigid EMT 1.25" conduits and bent these with a hand bender? any techniques or fastening hardware ideas to secure these vertically up a 40 ft. building with wood siding? I am asked to bid on a apartment building with 4 cameras on the roof. They want spectra IIIs or megapixels so I'm going to run a few cat5s with the siamese for each camera. Any ideas?

Doug, Thanks for the info. I meant to say I plan to use thin-wall EMT conduit in the 1.25" and maybe 1.5" ? Any ideas if 6 siamese would fit in that along with 2-3 cat5?

As I understand the megapixels contain cmos camera sensors. Now would they be subject to damage/blinding by lasers or powerful flash lights? Thanks for posting that shot, would it be possible for you to post more photos of that 3 megapixel camera with night time as well?

I had an installer working for me today short out 7 Bosch LTC 0455 cameras, they hooked up the power and bnc cable without shutting off the power supply. Does anyone have any ideas on how to repair these cameras or what is damaged?

It was a junior technician, he does a lot of grunt work. So he still has a job climbing the ladders and filling stucco holes after conduit is installed.

I spoke to the technician to get details. They did not turn off the power supply, crimped the end of the BNCs and well the two wires touched the BNC. He didn't realize that the power supply was still on until later on.

There is a really good guy (deluxecctv - dustin). I bought a camera from him once and it was very nice and helpful. He's in Roseville, CA.

I'm in Northern California. I think they ran power to the BNC by accident or the wires touched the BNC.

I'm in Northern California. I think they ran power to the BNC by accident or the wires touched the BNC.

I should have been more clear. Pretty much no video anymore after this incident. I am able to hookup new cameras and complete the installation for the customer. I think my technician shorted or damaged the cameras. Any ideas on repair of bosch ltc 0455 cameras?

Looking to buy 3 Pelco Spectra IIIs. Used is ok if price is right. Anyone here got any extras for my new home I'm building.

Yes I am interested in buying Pelco Spectra IIIs. Where are you located in the united states? I'm in california.

Does anyone know if a hand bender for 1 1/2" conduit is available for purchase somewhere in California? Does anyone how many siamese wires will fit into a 1" conduit?

I've been lucky then. I was able to fill the 3/4" with 4 siamese and 1 cat5. although that took a lot of time to pull wire.

I believe worldeyecam is in Lake Forest, CA. That's not too far away from San Diego. I am expecting to receive my order today. The reps I spoke on the phone were knowledgable and very helpful with answering my questions.

I bought from worldeyecam I also see a good site ApexCCTV

I found a few places on the web that are legit. [edit by mod-no store links] I recently bought from Worldeyecam, my order is going to arrive later this week.

Thanks:)

Can someone tell me what these are used for and what application? B-connector - Silicone filled:

I'd be interested in seeing some photos of your setup.

You are correct - YAAN manufactures under contract for Pelco.

Pelco got bought by a large electrical supply company recently. As of my contacts within Pelco say they assembled cameras in the USA with some plastics or accessory components - parts in China, Japan and Korea.