tech126

Thanks ou812!! Got it...

could you please PM me the link per mods request..Thanks!!

Thanks for the info.. Are they called AVTECH VGA01 VGA adapter ?? Do you know where I can get them from a reputable source?? I just figured that since it was a VGA port, I could just use a F/F adapter then it'll work fine. It did not mention about a special adapter being needed to use a VGA monitor.. Thanks again for your help..

Thanks again for the reply.. I now have a new basic problem. When I tried to connect a crt computer monitor to the vga out with a f/f/ adaptor, the DVR would shut down/power off until I disconnected it..It would then sound the beep and power back up..Am I doing something wrong or do I have a bad adaptor??

Thats the same fan that I just purchased today and installed. It flows enough but was debating whether I should install the shroud or not. The DVR is now warm to the touch and not hot anymore.. Thanks peeps for the help!!

So that means that I need to install video server E to any computer that I would want to remote access my system from?? Is there any other way I could view it without installing server E?? Thanks Scruit for the help!!!

Thanks for the sugggestions.. I have the dvr hidden in a entertainment center but it has alot of space around it..I'm just concerned that it'll run hot and just fry it..I'm looking for a fan to mount in the back just for some air flow..I'll post pics as soon as I solve it.. Thanks again..

^^^Thanks!!!! Now it works but how do I set it up for remote veiwing from work..I've already port forwarded port xxxx per portforwarding dot com. It's behind a router.. Question, do I need to install web viewer e on the work computer or do I just enter the dvr ip address in the web browser as shown above?? Thanks in advance..

I tried the search option but I found nothing at all so I figured that I ask. I'm just starting to setup my avc760.. By what I've read, I should use something else that port 80. When I have 80 as my default, I can log in through my web browsers. When I entered 7070 (anything but port 80 right??) in the web port under the system config tab I can no longer log in using my browsers but can still access it through web server E. BTW I', using web server E if that makes any difference. I hate to use port 80. It ALWAYS show 5 people logged on when I know that I'm the only one. If I use a different port number, then I'll go back to 1 user which is me. Any suggestions?? I also can't figure out on how to remote access it also. I've followed the steps in port forwarding but I'm not able to still access it. Thanks in advance

Is it normal for these DVR's to run warm/hot?? It's hot to the touch on the top. I noticed a fan port at the rear of the DVR but no fan..Is that normal?? Could I install a fan to be on the safe side. Did anyone install a fan themselves??I noticed while peering though the fan port that there was a open connector possibly a fan power connector??I just don't want it to heat up. thanks in advance.