Smit9352

Can't delete

Then once you host it there you can link it here using the tags. Happy posting.

These things kick so much butt! I had a customer bring one in and show us a little under a year ago and within 5 minutes of seeing it I was trying to find a place for us to start carrying them or to get one for myself strictly for trade show wiring. Awesome product and Great Recommendation!

Check www.j2ksupport.com and look into upgrading the firmware on it. Thanks, John

Hello, Couple of recommendations I have are listed below. [edit by mod-store link removed] <-- barely over $1,200 (sorry) but it is a 480fps unit with a dvd burner and all of the other features you're looking for. Very good unit with email on motion and a great amount of other features. (Mouse support also) [edit by mod-store link removed] <---- $878.75 This unit is mpeg4 with good features on the remote viewer program as well as the unit itself. 120fps recording. CD burner is the option that this unit has also.(Mouse Support Also) [edit by mod-store link removed] <---- Way under $1,000. Keep in mind this unit is only mjpeg and not Mpeg4 so the quality will be somewhat lower on this unit. The remote viewer features on this unit is software based and is "ok" but nothing close to spectacular. Look over those 3 if you got any questions for me you can pm me or just reply to this thread for me. Thanks, John

Did you try lowering the speed in the network setup? Thanks, John

Why not use something of this sort? 3.5mm plug on one end and two open wires on the other! I'd get these that way you don't have to cut... cutting = touchy subject with some companies. Thanks, John

I'm not to to familiar with that unit but I can let you look at a manual to one we carry that seems very similar. http://tinyurl.com/4n9xqq There's a link to the .doc files for viewing! If you need anything else please let me know. Thanks, John

Best site ever for that dvr model. As far as questions and concerns on that unit. x2 Recommendations on that site!

I typically have good results when doing this so if you would like you can pm me or email me your remote login router information and I can assist you. You'll need to setup Remote Administration on you're router then pm me the password and info and I'll do my best! Thanks, John

Yep it does. The plastic plates in the way of seeing it tho... =( My bad, John

Housing = 618HB Mount = CMB208 That's the best I got and it's a AC housing. Mount has a small hole through the bottom of it about 2inches in diameter and works like a champ. I think it would be around $50 for the combo but I could be wrong... the sales reps here always work well with pricing. How many were you needing? Thanks, John

That's kinda like "pick your poison" is it not?

You're welcome qasim I really tried to setup the router and figure out why you cannot connect internally but I'm rather uncertain. It's now setup tho to where you can connect externally which I think is a little harder than internal but uhm.... that's weird truthfully. Good luck and if you need anything else from me pm me! If anyone wants more info on the dvr goto www.j2ksupport.com . Thanks, John

I'm not asking everyones location... I'm asking whats the location of this job. Thanks, John

For what the whole system or the card? I'm hoping for just the card... if your budget is $700 for the entire system I don't think you're going to get a very good system. Thanks, John

Dc-9 power supplies like this? [edit by mod-store link removed] They are regulated but not a 1.5amp per, (only 1amp per) but are fused. Thanks, John

Has to be a link to a .jpeg or .bmp file or something of that type file extension. Thanks, John

Ohhhh The Jpeg2000 days.I got a walk through I helped make with Argus that I'll upload and provide you with a link to which should help you greatly. Checkout www.j2ksupport.com sometime also as it's got all the information on those units as well. Below is the zip file of the two walk through I have for that unit tho. http://www.mediafire.com/?jncc9o2rkaz Also here's a link to the port forwarding setup as well (tho I'm sure you know what you're doing). http://portforward.com/english/routers/port_forwarding/Belkin/F5D7633-4/eMule.htm If you can enable remote admin I'd be happy to login to the router and set it up then tell you what to program into the dvr. Thanks, John

Location?

Have you looked at the drop ceiling tile domes? They come in gold/chrome and work well, but in my opinion they are rather large. Like those? I know of em in 8inch and 12inch domes...

I got a 4channel H.264 unit that works well but I only have it in a 4 channel currently with a DVI/S-Video/VGA and BNC out. Also I copied a portion of the nighttime video on the unit and uploaded it here http://www.mediafire.com/?wdbjsk1t1vs as far as the video in the day goes the only file I have is 114MB so it'd take a while to upload or to split it up. If you want more info on it tho it's listed here Link here... Thanks, John

Get a J-Mount http://www.cctvimports.com/index.php?main_page=product_info&cPath=1_9&products_id=243. Holla!!!!!! Thanks, John

http://www.host45.com/resources/ispsmtps.php You're using the right SMTP correct? Doublecheck that and for GMAIL... checkout these two links. http://lifehacker.com/software/email-apps/how-to-use-gmail-as-your-smtp-server-111166.php http://www.geekzone.co.nz/tonyhughes/599 Hope this helps if not tell me the info you have programmed in and we'll see if I can assist you. Thanks, John