kevinmcf

is geo card still avail?

I have a 7016 with a hdd crash I tried to copy system files to new hdd but NG. I am currently trying to get Pelco to sell me hdd but they want me to send unit in. If anyone out there has software for a 7016 and make a copy or can duplicate a hdd please let me know. also interested in what hardware was used to install a SATA hdd and how big hdd can be used in this case? the PIII only can use 160GB ata66. Seagate ata66/100 works w/7200 speed. But limited to 160GB thanks for any help

I have a dx7000 also (a DX7016-180) and I had a known hdd crash, I seen it comming so I purchased a seagate ata66/100 160gb hdd and cloned it now mine boots but needs a system disk (misplaced original). when I cloned the hdd I made a new one but will not accept it. If you want to swap hdd and see if yours will boot on my hdd and mine on yours, or if you can clone your drive that could work also, with a system disc. I tried to get replacement hdd from Pelco but they want me to send unit in for repair. I believe they'll charge w/shipping $800-$1000 to replace hdd for you and diagnose. If its a bad Motherboard it depends The earlier motherboards w/810 chipset are no longer avail. and not supported. The 815 chipset are still supported by Intel but getting hard to find.

I assume you mean by Hardware changes were are talking about Motherboard among other? do you know anything about using a scsi hdd for the PIII and how it will work as far as speed and size of hdd. Kevin

I have a 7016 with a hdd crash I tried to copy system files to new hdd but NG I am currently trying to get Pelco to sell me hdd but they want me to send unit in. If anyone out there has software for a 7016 and make a copy or can duplicate a hdd please let me know. I'll can send hdd and pay for your time also interested in what hardware was used to install a SATA hdd and how big hdd can be used in this case? the PIII only can use ata66. Seagate ata66/100 that works w/7200 speed. thanks for any help

if 7016 still avail. how much

Unfortunatly I contacted pelco and they say it cannot be done. I have a DX7016 with a hdd crash I tried to copy system files to new hdd but NG I am currently trying to get Pelco to sell me hdd but they want me to send unit in. They also informed me windows cannot be upgraded. If anyone out there has software for a 7016 and make a copy or can duplicate a hdd please let me know. I'll can send hdd and pay for your time also interested in what hardware was used to install a SATA hdd and how big hdd can be used in this case? the PIII only can use 160GB ata66. Seagate ata66/100 works w/7200 speed. thanks for any help