si_kungs

I need your feedback regarding KPSEC and DIGIGUARD DVRs.

ok. thanks for all the inputs.

is it safe to use the same wire guage of speaker wire to run 12Volts power for cameras?

sir you can use a time domain reflectometer to check the cable. it will tell you how long is the wire. so if it is less than what you got before you know where the broken line is.

so there are many dvrs stack on racks. do you still use analog sir? or all are ip based?

sir the domes are like the ones installed in casino, the gold tint will not let the people see where it is looking.

sir i have read on the forum that you are doing casino cctv. for casino what brand do they usually use? and is the recording per second more than 30fps?

we use 12 volts regulated power supply but the output when measured is 13.8V . will there be a problem with this? will the camera be busted easily?

ah i see. thanks. sir survtech are your familiar with vicon system? what protocol for speed dome do they support?

sir for ground loop isolator where do i connect it? at the end of the cable entering the dvr? or at camera?

if you were unable to connect. did you try clicking the search button on the video server? it will show you the connected device on your network. it is located beside the address box. also can you connect to the dvr from the internet?

thats why i get humbars. is cable also the problem?

yes you need to look for a local distributor to fix this.

thank you sir

thank you sir survtech. what would be the picture degradation be? it will become blur?

sir do you have a formula how to compute it? so i can decide whether to add additional pair to the power.

for gauge 24. how long can you run 12V power? also, running 220V can it interfere with the video signal?

please contact supplier for instruction of how to do hardware reset. this will set the username and password to default.

sir what do you mean by lock up every three days? hang up?

yes what you did is to manually move the clock. maybe the crystal oscillator running the clock is not functioning anymore

sir you have to install the driver first before installing the software.

please set the port forwarding feature of the router . you need to specify what port and what address will it direct the connection in case the port was accessed.

have you installed the driver of the card? or just the server software?

sir remo it is the version of the video server (1.0.6.6) . please check the version of the DVR on ADVANCE>>SYSTEM

for canada? what certification is needed?