randy@wholesaledialup.com

I put up some IR cameras and built boxes with 1/8 inch clear plexiglass on the front and at night time all I can see is the camera it is like the plexiglass is a mirror at night time. Is there anything I can do like maybe tint it or ??? Thanks in advance Randy

I hear you on that I am looking at a PTZ-3130-LL for $1300.00 from ivcco dot you know what... I am not allowed to put links in forum yet Thanks Randy

I am looking for a four channel capture card with digital zoom. Can anyone reccomend a good one or is there such a beast? Thanks Randy Jordan

Can you tell from the specs I entered if I should maybe get a better card or better cameras? Seems like the cams with a 6 mm lens should show a good pic at 150 feet but then again I am kind of new to this stuff Thanks Randy

I will try to give more detail of what I am trying to accomplish. I have a customer with a tow yard it is about 150 feet by 60 feet I have the cameras mounted on top of the building about 25 feet high two cameras criss cross eachother to see the 150 foot run (one on each corner of building) The problem is that you can not make out a face in either day or night. So I was wondering how to get a better image. Thanks Randy I bought 4 of these cameras CBI8954H Image Sensor 1/3" Color Sony Super HAD CCD Resolution 540 TV Lines Minimum Illumination 0 Lux w/ IR on Lens Furnished 6mm Power Supply 12V DC Power Consumption 650mA AWB yes Auto Gain Control Yes S/N ratio: More than 48dB Video Output 1.0Vp-p 75 Ohms Sync. System 2:1 Interlace Picture Element NTSC: 768(h) x 494(v) / PAL: 752(h) x 582(v) Electronic Shutter up to 1/100,000 sec BLC yes IR Distance 150' Gamma Characteristic 0.45 I have this capture card in a p4 2.66 with 768 ram Model Name DF3000 Camera Input 1~16CH Audio Input 1 CH Display Frame Rate 120 FPS Recording Frame Rate 120FPS Screen Division 1, 4, 6, 7, 9, 10, 13, 16 Resolution 320X240, 720X240, 720X480 Compression Selection from MJPEG, MPEG4, MPEG4+