Tony Rowland

I have brought network cable and balums each end and only getting flashing red light no picture there is the right power supply. Don't know what else to try. Any ideas

hello can you help please I have a 8mp 4k camera with a prolux 5104hs-4k-x1 The problem i have is the camera comes on in the day but the picture is blurred and very strong colours and at night the camera switches off and i can’t hear any Audio. i have put a direct power supply to the camera both ends but the ir just flashes. is there something in the setting i have to change.

Does it matter running the old cameras on the same system because that's what I am doing I have brought the cable and the tool and the balums Ready to fit this will also do audio will it

8 to 10 metres away I have 2 fusion cams (I think they are only 2 or 4mp) and they was a kit and the lead on that looks the same but even thinner and they run ok. But I wanted a better quality picture so you could zoom in and pick out a face or number plate that's why I went for this kit. Top of the mendips chilcompton Somerset nr midsomer norton   Quote

Does it matter running the old cameras on the same system because that's what I am doing?

8 to 10 metres away I have 2 fusion cams (I think they are only 2 or 4mp) and they was a kit and the lead on that looks the same but even thinner and they run ok. But I wanted a better quality picture so you could zoom in and pick out a face or number plate that's why I went for this kit. Top of the mendips chilcompton Somerset nr midsomer norton

Yes no problem

Hi thanks for getting back to me I am not sure what cable it is but will send you a pic what it is

Hi i have tried the new power supply and I am getting the same unfortunately really bad picture with strong colours and no picture at all at night only a flashing ir light. I was hoping the power supply was going to fix as it made alot of sense.

Thanks for the information that's so helpful I will let you know how it is when the power supply comes. ?

Thank you so much for this information I didn't have a clue this was the problem, I did wonder why the person in question wasn't getting back to me when I was telling him my problems. I have now ordered that one you sent me. So that power supply will happily power all of it or just the camera's? Thanks again

This is what came with the kit

yes. it was i brought it of ebay riscam cctv. why are they no good?

yes all i got with the kit was power supply and a 5 lead plug in for dvr and camaras. And 2 camara's And some thicker cable which takes audio as well My old camara Fusion i have been using on the old leads which are alot thinner there the only one's that work day and night.

This is what came with the kit

Thank you i will have a look at that.

12 v power supply same as the dvr

Hi when the kit came it comes with a multi lead with 1 female and 4 males sockets on main adapter plugs into the female and also makes the 4 males live for the camera and the dvr but i have also tryed another adapter straight to the camera but just get the same crap picture in the day and a flashing ir light at night. But the two low quality cameras seem to work, I am puzzled

Thanks for the reply I am useing 2 standard fusion cameras and 1 prolux 4k but I do have another to install. The power supply runs the set top box and the two fusion cameras which seem to be fine and I have a separate power feed for the camera which I thought would make a difference.