remo-mec

I found the solution. One of the cameras is a wireless camera on 2,4GHz. If the carrier is lost or any other problem with the camera, the AVC changes the channels. There is a bug in the software. I take only cameras by wire. Many thanks, remo-mec

The switch is a 8-Port 10/100M Nway Switch from Conrad Electronics in germany. The LED's shows like 100MB/s but its very slow. remo-mec

I have a AVC761 and made a backup over ethernet. (over USB its very slow) The switch shows 100Mb/s but I tryed it out and for 400MByte the system uses 40 minutes! My system changes often the channels. I postet "AVC761 channel changing problems". Works your system fine? After some minutes ore hours on channel 1 is under backup channel 3 or 4... Life video is allways perfect! Many thanks, remo-mec

It dont work. After some ours it changed the channels :_( I try to bring it back to the seller. Many thanks, remo-mec

Many thanks for answer. I had the version 2.0.2.0 Now I have put the version 2.0.1.1 in my AVC and try it. At the moment it works fine. I hope the best.... remo-mec It dont work. After some ours it changed the channels :_( I try to bring it back to the seller. Many thanks, remo-mec

I try it out and there is no system in changing the channels. It changes the channels when it want. My firmware is 1.0.6.6 Where can I get a new firmware? Many thanks, remo-mec

I try the hardware reset at 13.30 . It works fine for exactly 30 minutes. Every hour the systems beginns a new search list. Exactly at this time the channels are in the rong succession. I hope someone can help me. Remo-Mec

Many thanks for this answer. Thats right. After each reset it works fine but after some minutes the channels are changed. Sometimes its possible, that after an ower working the channels are correctly! remo-mec

First, excuse my english. I have an AVC761 with 4 cameras. The first channel is with sound. After installation or new starting it works fine. Camera 1 on channel 1, with sound Camera 2 on channel 2 Camera 3 on channel 3 Camera 4 on channel 4 On the live-monitor its always perfect. I made a back-up over network and after some minutes the cameras and channels are changed: Camera 1 on channel 2, sound is always on the right place! Camera 2 on channel 3 Camera 3 on channel 4 Camera 4 on channel 1 On the live-monitor its always perfect. I hope some one can help me? Many thanks, remo-mec