bobcctv1

Hi, I have 2 Dahua HDW2431TM-AS-S2 ip cameras which i want to upgrade to latest firmware. First one upgraded with no problem using web interface. Second one refuses to upgrade. Have even tried removing camera and plugging direct in to a poe hub to eliminate any cabling issues. Also tried upgrade via config tool and that gets to 50% and fails to complete upgrade. Also factory defaulted the camera in case config was corrupt but same issue. Initially both cameras were at same level so cant make out why this one stubbornly refuses to upgrade. Any clever people with any ideas to get over this issue.

Hi im looking to upgrade my Dahua DVR which only supports 1080 to a Hilook DVR. I currently have 3 Hikvision 6MB cameras and 2 Dahua cameras which are 4MB. Currently the Hikvision cameras are using ONVIF to connect to the old Dahua unit. Im looking at the 8MB NVR-C-8P (B) 8 Channel NVR by Hilook. Question is will it work ok with my Hikvision cameras and support Motion Detection etc. Appreciate i will have to use ONVIF to communicate with the Dahua cameras which i may eventually upgrade. Cameras i have are DS-2CD2365G1-I Hikvision, DS-2CD2063G0-I Hikvision, DS-2CD2T85G1-I5 Hikvision and 2x Dahua IPC-HDWIPC-HDW2431TM-AS. Cant find any information as to whether the Hilook DVR will actually support the Hikvision cameras. Any help would be appreciated

Thats really good to hear. I always was under the impression that Hikvision was quality stuff. Would you know if the Dahua cameras would support MD using Onvif v 2.6 on the Hilook DVR. Thanks though was letting me know .