ideas

Wow got it working with Dahua Firmware i set my pc static ip to 192.0.0.128 i set my nvr static ip to 192.0.0.64 i had my NVR on DHCP before, so gonna try again Antivirus disabled Firewall now off ok so i tried this firmware DH_NVR5XXX-4KS2_MultiLang_NP_V4.000.0000000.1.R.20190809.zip and it bricked the NVR, i wasn't worried because it was useless anyways, i restarted twice but still nothing so i tried this firmware https://files.dahua.support/Firmware/Rejestratory/NVR/NVR5xxx-4KS2/Stare/oldDH_NVR5XXX-4KS2_Eng_V3.215.0000000.3.R.20171211.zip and WOW, now i have Dahua on my once Dead Lorex NVR Thanks a lot everyone for your help and guidance this is what i did 1) set my PC ip settings to ipv4 192.0.0.128 sub mask 255.255.255.0 gateway 192.0.0.1 2) then i used and run as admin Tftpd64 Server by Ph. Jounin 3) extracted all the firmware files in C:\Program Files\Tftpd64 folder changed the Server interfaces to 192.0.0.128, just leave it open changed nothing 4)open NCOM v1.02 Hit *** before the countdown ends typed: printenv and hit enter setenv bootdelay 9 enter saveenv enter setenv serverip 192.0.0.128 enter setenv ipaddr 192.0.0.64 enter setenv gatewayip 255.255.255.0 enter setenv netmask 192.0.0.1 enter saveenv enter type: reset hit enter Hit *** before the countdown ends type: run up hit enter then the Magic happens You guys are Geniuses Special Thanks to original post https://ipcamtalk.com/threads/lorex.26440/page-3#post-278306 MixManSC TheDude Coachtech https://ipcamtalk.com/attachments/ncom-rar.30273/ then i bricked it again by updating it via webui with DH_NVR5XXX-4KS2_MultiLang_NP_V4.000.0000000.1.R.20190809.zip, so i tried installing oldDH_NVR5XXX-4KS2_Eng_V3.215.0000000.3.R.20171211.zip but was getting error hisilicon # run up stmmac_init,692,0x70431,3 miiphy_speed,366,1040 miiphy_speed,366,1040 ARP Retry count exceeded; starting again do_tftp_secure failed still boot stuck at logo did some google search then tried this from these 2 original post https://ipcamtalk.com/threads/dhi-nvr5432-16p-4ks2-wont-boot-up-after-upgrade.43490/page-4 Thanks to Austrum https://dahuacctv-com.translate.goog/threads/nvr5464-ks2-%D0%BF%D1%80%D0%BE%D0%B1%D0%BB%D0%B5%D0%BC%D0%BC%D0%B0-%D0%BF%D0%BE%D1%81%D0%BB%D0%B5-%D0%BE%D0%B1%D0%BD%D0%BE%D0%B2%D0%BB%D0%B5%D0%BD%D0%B8%D1%8F.511/?_x_tr_sl=ru&_x_tr_tl=en&_x_tr_hl=en&_x_tr_pto=sc Thanks Technical support VidiMost.com Specialist so i download this update.img file and walla... my nvr was back and running add this file to TFTP dir then type in NCOM https://drive.google.com/file/d/1k07AZfU1mPpUuUIldL0Ej9IX5LnhPPR_/view so i was unable to ping my NVR so i used my last known ip in the terminal and configured my PC in the same ip range setenv ipaddr 192.168.1.128 setenv serverip 192.168.1.108 setenv gatewayip 255.255.255.0 setenv netmask 192.168.1.1 saveenv reset run up then updated firmware againg via webui with this file https://dahuawiki.com/images/Files/Firmware/DH_NVR5XXX-4KS2_MultiLang_V4.001.0000006.0.R.210208.bin

thanks for your response, i know they are completely different which is what i want, so i may be able to install other cameras with facial, human, vehicle detection, line crossing, motion area, camera deterent, etc. Also i cant get remote viewing to work, because it only accepts, lorex DDNS for remote setup and that Lorex DDNS does not exist anymore.

just found some more info processor=ST7108 updateSerial=NVR5X-4K

what about the Cameras, can they be updated with a Dahua or Hikvision Firmware?

so none of these other firmware would help https://dahuawiki.com/FLIR/Firmware_P2P_Migration or http://dahuawiki.com/images/Files/Lorex/Firmware/

damn....

by tha way, what do you mean by Costco reverb unit, please explain to me and then the 900 series to a 600 series, whats the difference?

it works ok sometimes, DDNS Remote Viewing, very buggy accessing from PC & has little to no features,. like human or car detection, line crossing, etc, thats why i was thinking to put on a Hikvision or Dahua firmware, but need help before i brick it with the wrong firmware

hello i have a 4K Lorex on the Sticker it says 16ch NVR 4K 2HD 16PoE 60Hz Model NR916-N Serial# ND031709013507 Device id lnvdf79101e3... manufacture date 09 2017 powered on the info button shows Model LNR616 Serial# ND031709013507 Device id lnvdf79101e3 firmware version 00138 Build date 07-08-2017 Client port 35000 http port 80 Cameras ip 10.1.1.28 Lorex LNE8974AB My intention is to breath new Life into this NVR, is there a Dahua or Hikvision firmware i can update to the NVR? thanks for your expertise

i am a cctv home user, i am happy to be here for knowledge and insights