3RDIGLBL

Just an FYI for the northern folks. The new ACTi KCM domes do not feature a built in heater. Be aware that they are speced to -4F and not -22F like the ACM and TCM 7411's. I just realized this today and asked ACTi about it. Currently there is nothing seen in terms of a KCM with a heater. My understanding is these cameras generate more heat than the ACM and TCM ones do so I assume they operate nicely in -30 to -40F temps but there is no real life data on this yet. Anyone have a freezer that goes this low who can test it?

Has anyone tried an ACTi KCM series other than the KCM 5111 with Exacq? Wondering if the KCM-7211 will work with Exacq. Exacq states they haven't validated it yet and are unsure of a time frame in doing so. It doesn't mean that it doesn't work though

Are you running DC to the cameras or AC? If they are dual voltage and you're running 12V try 24AC. If the cameras are 12V only then try an AC to DC converter. Fixed all my ground loop issues at one site I had.

I tried this and all it did was stretch the image to fill the display so of course it distorted everything. I it's cropping a good 5 to 6 feet of view on the left and right side of the image. In the camera setup I see all I want but in Milestone it gets cropped and now shows me less than I want. grrrrr I hate Milestone.

I have a customer where we installed a number of Axis 3204v cameras and they are running Milestone essentials. At the camera we are running a resolution of 1280x800 but milestone crops the left and right side of the picture. I messed with that for a while today and can't figure out why it does that. I am not a Milestone fan at all so needless to say this might be user error but I can't seem to figure out where, I'm far from knowing my way around Milestone. Anyone have any ideas?

No problem with connecting. Good point to check to firmware.

Don't know if you resolved this but hopefully you figured to give Kantech a call. Their tech support is extremely helpful.

Throw a desicant pack in there. I just purchased a number of the 3 gram packs that have a self stick side and individually packaged.

Cat 6 adds cost to the hardware. Cat 6 is not needed for any ip camera on the market. We will run cat 6 for switch uplinks because of the bandwidth requirments to push multiple cameras but for a single camera we don't. A box of cat 6 is almost double that of cat 5e and in some instances I found that it is double.

We do exactly what soundy is describing here and we use the same baluns. In reference to the outdoor cameras.....we have an install running over two years now at about 150' distance using Arecont 3130's inside an enclosure and power running over the UTP without any issue what so ever. We told the customer what we were going to try and if any issues come from it we will address it and to this day every thing has been great. The Arecont's were 12v so we used a step down and to my surprise none of those have failed either. Since it can drop to -40 in winter evenings up here I am really impressed with it. Everyone has there opinions but the best way I find is to just do it and see how it turns out knowing that it just might not work. Trying it will at least provide you with some experience and knowledge in a real life situation.

I just tried to duplicate this with 4.2 and I don't see the issue. I'll be upgrading my customers to 4.6 soon before there one year license expires so I'll try it again with 4.6. Did you happen to give 4.6 a try?

You seeing this at the server or while logged in through the client? I have 4.2 installed on Ubuntu 10 for a couple of customers and have not noticed it but I can try to see if I can duplicate unless you have tried other versions.

Not sure if anyone attended the Red Bull Crashed Ice event in Quebec City this past weekend but look it up on YouTube it's awesome. My wife thinks I'm strange when I take pictures of camera installs LOL! I spotted this temporary install at the event. I'm not familiar with the PTZ camera but I'm sure some here may be but it definitely looks like they are using a Ubiquiti CPE although the one here is larger than what I typically use. The antenna is the same shape so I can almost bet it's Ubiquiti. I saw a couple temp installs while I was there. It was reported that 110,000 spectators were there to see the event that was broadcasted live in 55 countries.

The data online though is 0.2 for the 3135, which is probably the 3MP. Whereas the other is 0.1, also color. There used to be specs floating around with no IR cut, but they've washed their hands of it and just said "IR sensitive". Right from the AV3135 spec: 1.3 MP B/W and 3 MP Color 2040(H)x1530(V) RGB Color 1280(H)x1024(V) Monochrome 0.02 lux @ F1.4 1/2” color and monochrome CMOS sensors

I haven't heard of anyone getting sued because a CCTV system failed to produce useable evidence. All our invoices and estimate contain a disclaimer that CCTV is not guaranteed to deter, prevent or capture illegal activity no matter if the equipment is working properly or not. Do not sell a system to a customer promising things you can't guarantee a system can do. You can get a contract from alarmcontracts.com which is a very well known place to obtain security industry contracts. Contracts are double edged because if you are the only company requiring them out of all the competitors you have then it does not look good for you. Where we are no one has surveillance contracts but we have alarm system and service contracts. We do have liability insurance and we are bonded as well as most larger installs require this in our experience and it would be crazy for you not to have any type of insurance.

No Interesting. I would of thought comparable although the 3135 states .02Lux at F1.4 and 1305DN is .1L. Lux is over rated LOL! Wireguys, have you tried the AV-2825 yet. I'm itching to try it out because I've heard good things and stuff like there is nothing nothing like it on the market currently bla bla bla......I was ready to throw in the towel with these guys but supposedly this AV2825 is the the savior......I would love to read some true life experiences.

I would say yes but the 3135 has a dedicated 1.3MP B&W sensor vs 1305 that uses an IR Cut Filter. But I don't know for absolute certain. I was told today that the AV-2825 blows away the 3135 in night time and day time performance. I'm going to order one to test that out! I have an approved job for 8 of the 3135 but now I'm second guessing the selection here and the customer is interested in the AV-2825 which is cheaper because there is no need to buy a lens or enclosure. I've installed a few of the 3135's and there just a PITA to deal with.

What is your opinion on these two side by side. I have an IP8332 at the office but not an ACM/TCM 1231. Anyone done a side by side shootout of these two cameras and maybe have pictures? My guess is going to be that the IP8332 is a lot more vibrant during the day but I'm not sure of the night performance mainly. Thanks

Amen!

What POE class do you require? They have different wattages so be sure that what ever you get put's out what you need across all ports. Zyxel makes an 8 port switch with GigE uplink for a great price and speced at 15.4w across each port. Check them out and sell through a number of sources including newegg and amazon.

Vivotek FD8134 in the basement of an apartment building. There are four 15W Mercury lightbulbs I think putting out 45W of light. It is kind of dim lighting so the noise is very apparent in the photos. Shutter is set to 1/30, brightness and contrast are at 0, quality is set to excellent, exposure 3 and gain is set to +2. Uploaded with ImageShack.us Uploaded with ImageShack.us

If you value your sanity stay away from Arecont.

First off " title="Applause" /> There got that out of the way. The DVR's I have had had experience with do not always like to have the date messed with and some actually state a format is required upon changing the date. First I would remove the accounts that have access to the DVR and if anyone says anything come up with some excuse. Second I would explain to the customer what you are going to attempt to do may delete all the recording on his DVR and to back up anything he want to keep before you attempt it. Third I would try to change the date back to the day you want to record over and hope that over writing the index files created by the DVR for the date wanted actually works. Hopefully you will over write that date. You could try setting the time to just before the event and if it was 10 minutes long let the DVR over write for 10 minutes. I would make sure motion is in that area for the duration to be sure that the camera that saw what it was not supposed to see is recording or turn on continuos record for those cameras. Easiest possible way is if this is an embedded DVR just remove the existing Hard Drive and replace it with a new Hard Drive and if it's a PC and the data drive is a separate drive just do the same. You still have the previous three months and if anyone says something tell them the hard drive went bad and it had to be replaced. Your client will still have the previous 3 months. Once 3 months has gone by with no incident format the drive and now you have a spare! As you can see there is no simple silver bullet to fix this snafu at least that I know of.

Rory, need to somehow make an installer for all these changes now. It's great that it is so tweakable but the value comes in when you can bundle a customized cd with the installer for your customers. Customer installs the software and it has your business name all over it with contact information etc...

Thanks for the comparisons. I have a 1344 at the office but haven't messed around with it yet. I also have 3 different 8 series Vivotek cameras I received this past week as well as a 3mp Arecont camera. At some point I'll put out my tried and true Pano CP484 against these to see how they compare.