junglejim42

many thanks sean, I will bear that in mind if I need to use it permenantly

Found them on Ebay( canada) many thanks to those who tried

the socket that is part of the camera

Does anyone know where I can get the Direct drive (DD) socket from (fitted on side of camera), or even an auto iris cable extention lead (if they exist). I can get the plug part easily. I have searched Radio shack, but maybe they are called something different in the states.

Does anyone know if Vantage is a renamed brand?. (ie Sensormatic are baxall)

I had a thought after my last post (as the cam also accepts 12-30VAC). (quick rummage through my xmas decorations lighting box, aha! a 24vac class 2 transformer.) connect it up, turn on and all working within 10 secs. So either the auto AC/DC switcher isnt working properly, or as the camera is rated 11 - 40 VDC needs more than 12v

the camera is rated 5W so <0.5 amp. I am using a 12VDC 4A supply. I have tried other supplys as well.

1 1/2 mins black/white flickering 2 mins of black screen 1min inverse picture 2mins picture slowly appears until normal some screen shots

I have just obtained 2 new cameras which are 12vDC/24vAC auto switchable, when turned on using a 12vDC supply, it can take some 5 minutes for it to warm up and get a stable picture. I dont suppose this is normal, or is it?? there isnt a drop in voltage after turning on. I dont want to go and buy an AC supply to find things are the same. any ideas please

Can anyone suggest software to view multiple avtech 760's at the same time. NUVICO cannot find the 760 many thanks

when somebody types into their browser the address you created at dyndns, Dyndns will then redirect them to your IP address. Providing Java script is enabled, the log on screen will appear.

I use the same model and firmware vrsion. using a 750GB HD is get about 11 days recording using best and frame settings

I picked up this camera second hand on ebay and it actually works. Alas no manual, I've googled, yahoo'd to no avail. I did find the Vantage web site but this model must be so old it isnt listed. has anyone any info about dip switch settings and the other controls please before I start playing

I have used some of these lens before, and seem ok. only had one damaged in the post which takes up to 10 days from HK.

thanks. it is quite possible it was due to disconnecting cameras whilst still recording. All seems fine since I stopped recording, powered off for a few minutes , powered on and started recording again. I didnt do any hardware resets.