Gotta Stop

Having a problem connecting Diginet 4.13 pda using Tmobile. It seems Tmobile uses port 8080 for their internet proxy which I think is conflicting with Diginet pda software which uses port 8080 to connect to the server. I am using a HTC touch pro 2. Is there any settings i can change to get connected???

click on the desktop shortcut for diginet and open the properties. Check the compatibility mode for winxp and under settings disable the desktop composition.

The ports you changed were for the center program. For the web based server you need to change the port settings in Apache.

The ports you changed were for the center program. For the web based server you need to change the port settings in Apache.

cust support is wrong. You can view mult. cams in playback mode in geo

The center software will only allow for one port address. Changing the port in the center software requires a reboot of the computer. With that in mind you can connect 1 server with the center software and one with the web server. The new center software will allow up to 32 cams but you must connect to multiple servers and they have to have the same ports open, so they will have to be in back of different routers with different ip's.

You might try a old copy of ivista like 3.1 . Its a webcam program that will transmit the desktop. Install it without selecting a capture card and set it to a different port that geo.

First of all koditec is not the same of kodicom. On your sites router open ports 8080 to 8090 and 3001 to 3005 . You can download a manual from hdvr.co.za. Go to suport and get the pdf for the (Hyundai DVR) which is a Kodicom. You can also download the pda program and 4.13 center from this sight.

How about geo 100 software. You can get it on ebay for around $20.00

MY SYSTEMS WORK FINE SINCE I WENT TO NVIDIA MOTHERBOARDS.

VIA CHIPSETS ARE INCOMPATABLE WITH DVR CARDS THAT USE THE HINT PCI BRIDGE CHIP USED ON CARDS WITH MORE THE ONE CONEXANT CHIP. THATS WHY THE GEO 600 WORKS AND THE KMD 4400 CRASHES.

DONT USE A MB WITH VIA CHIPSETS ON A DVR BOARD WITH MORE THEN ONE CAPTURE CHIP. DO A SEARCH ON THIS FORUM FOR KODICOM AND VIA.

Im using a samsung i700 pda phone on the verizon wireless network. With the Kodicom I am getting about 3 or 4 fps full screen while the Geo will get 1 fps on the standard size. On a network the Geo does better but full screen kodacom flips the screen and retail the aspect ratio while the Geo is distorted. I do like the Geo PTZ on the pda.

The port is set by default to 80 but can be changed during the webcam setup. The frame rate on the Geo pda sucks as compared to other pda programs such as the one that comes with kodacom. I have also had problems with the aspect ratio when enlarging the picture with Geo.

is there any way to have two diginet servers behind a router and have the remote software connect without resetting the ports in the remote software and rebooting?

make sure both the remote and server network setting are the same (default on diginet is 8080 and then make sure your server's router opens that port for it.

Will cards without the si chip be able to use 7.0 if a dongle is purchased?

You might try using the pelco p and not the d . When I wired up a pelco spectra II I could not get it to work using pelco d but resetting both the cam and geo to pelco p it worked.

sorry its hdvr.co.za