IDN

Hi all, I'm currently running control center V2 on one PC and it is monitoring 28 cameras. 16 cameras come in via the internet from 3 other PC's and 12 cameras are on the PC running center V2. For some reason, the cameras will drop off one by one over time and I have to right-click the subscriber, click "Camera Monitor," and then select "Play" under the drop-down box next to "Live." I also have to do this for all the subscribers when I first load Control Center V2. Is there a way to stop this from happening and make the default option as "Play" for all subscribers? I have read through the manuals and can't find much info on the subject. I also searched the forum and didn't see a similar problem. If I have missed a similar post, I apologize for the over-post. The Geovision Version running Center V2 is 8.12. Thanks for any help in advance. If you need any additional info, let me know. -Matt

I have that unchecked on all three remote computers and they still drop offline at random times. What does control center cost?

With the geovision software, you can easily set the max frame rate for each camera. You just have to click on "system configure" and then select your camera. You'll see an option that says "Recording Quality" above "Frames/Sec:". Across from Frames/Sec is a small green arrow. If you click that green arrow, a dialogue box opens up where you can set max frame rates. Hope that helps.

Is it possible to connect an IP camera to Control Center? If so, what's the point of GV-NVR? Thanks for any info in advance. -Matt

I've used both 2mcctv and AMAsecurity before with no problem. I can't post links yet, but searching either name should pop up their respective sites. Hope that helps.

Thank you. I hadn't tried the other options yet, I just assumed center V2 was meant for watching live feeds. Thanks Again.