davey

Hi im responsible for the overall working cond of our CCTV system, just ensuring it works and nothing else. The problem we have is when pressing the EVENT key on the keyboard you only get camera 1 events. The set up is a digi sprite 2 and 2 colour vcl domes, when you power the system down and re boot for the first five mins or so the camera's will auto swop when a alarm is received, but after mins no event is captured on the camera 2 and both camera's stop swopping over when a alarm is picked up. I have had a cctv company trying to help with the problem, but we are all scratching our heads. DM has suggested it could be the hard drive corrupted or the memory module on the board, can anyone suggest any ideas. Regards davey

Thanks for the reply, using gjd passive's which when activated go to the dome camera and from dome to the dm unit, the domes move to the correct pre sets and we definently have a signal going to the DM unit. Power the unit down using correct procedure through menu and no 1 camera key for five seconds then pull the supply plug. Re loaded the software today just in case, but still not cured.

Hi Is there any CCTV engineers want a challenge to sort out a DM 2 Sprite with a couple of problems, its in the Cheshire area. davey

Anyone help ?

Anyone any ideas or help ? davey

Does anyone know if there is software available to view CCTV using windows mobile, i currently use DM network viewer on the laptop. Its a DM Sprite 2 using 2 VCL camera's. davey