shawn305

any helpful hint to get this going?

welcome to the forum

hey everyone i have a few adt pulse camera that i would like to setup around the house. The camera's are installed and were hooked up to adt pulse system. i canceled the service. i was just wondering if i can setup to view and record on my home pc and view it with my smart phone. the camera's i have are RC8025b-ADT, OC810-ADT. The wireless router that it is hooked up to is a ADT pulse gateway model # PGZNG1. If anyone knows how i can get this working can you please let me know? Thanks Shawn305

thanks for your advise

hey everyone i know this is an old post but i have this unit sitting in my basement collecting dust and i want to get it set back up... do you think it is worth it to buy the replacement hard drive for this unit or should i just cut my loss and but a new complete system for my home? i know i had asked this question earlier in the post but i will ask it again just in case anything changed. can i access the software to install on a new hard drive? can i use any hard drive, plug it in and load the software? Thanks Shawn

ok with that said i can just replace the hd and it will do it's thing and work again? i was told that the system is an older system and the software is in the hard drive and if i want to fix the problem then i have to purchase a new hard drive for the unit and all i have to do is plug it in and that is it? the hd number i got was 0710-0014-0102. i hope that could help you help me.... thanks guys

i just spoke to tech support and they do not have the software for it, they gave me the part number to buy the hard drive with the software already on it.. is there any other way? i have a hard drive to replace that one.

thanks for the reply i will try that and post me results

Hi everyone i have not been on the site for a while, just been busy. I have a problem with my Intellex system, when i start it up it is giving me adisk i/o error replace the disk and press any key. i did some reading and i could have a bad hard drive or a hard drive that is not working. i was just wondering if i replace the hard drive how do i get the software to load back to make the system work? and how do i load the software on the hard drive? i have a Intellex DVMS DV16000. thanks for your help Shawn305

hey everyone, i have a Intellex DVMS DV16000 and i have some footage on there that i need to save onto a disk or usb. Well i just need to get it off my machine and save it to my home pc. the unit that i have does not have a cdrw drive it only had a floopy drive, but it has 4 usb ports at the back. can someone help me determine what i need or how to transfer my video. i was reading somewhere that my system will only use a certine brand of crdw drive or it will not work, and i cannot find that info again to see if i can even get that drive because i know my unit is old. thanks for all your help

Hey everyone, how is everyone doing... been here for a few years now and got to say what a great place it is. So much helpful info and people. I have some dome camera's that i want to install outside my house (about 6 or 8 of them). My home normal rectangle house with a 2 car garage that is attached to the house but sticks out the front of the house. The front walkway goes along the side of the garage to get to the front door, it has a walkout basement with a patio over the basment door enterance, with another door for the upstairs door. anymore info need let me know Here is my question(s) 1. how high do i mount the camera's? 2. the wires for the camera's do i run them in plastic pvc pipe's? Anyother info that you would think will help me will be great Thanks Shawn305 Sorry for the bad drawings only had paint at work it is the top and side view of the house

Thanks guys for a great dicussion and shared opinions...

thanks again tip_ex for the help. do you know what type of cd burner i can install on this unit? is it easy to install

To export a clip, in your situation, you have 2 options. 1 - Install Network Client on a computer. 2 - If the unit has USB connection, get a USB flashdrive that has WIN98 drivers (2Gig and less, 1 Gig is better), that you will install from the floppy disk drive (if its still working), or through network connection. i will try option 2 and seee how that goes. for option 1 do i get this program from the intellex site ? and where do i install it ? on the dvr or on my home pc? How do you get the recoerded info through network connection? This will require you to have a server. If you do not have one, you can use your machine to act as a server. well i do not have a server and i do not know how to make the dvr act as a server... I will need further help on that. I don't think the height is in the way here. Depending on the cables you're going to use tough. It's more about what you see as picture from the camera. well i am going to use the coper rg58. i noticed somthing the other day when i view 4 camera setup on the screen the picture is clear but when i switch to singal camera then it gets slotchy, you can see the pixels. do you think that i need to update the drivers for the moniter? if you want to connect the Intellex to your TV, you have several options, but it will require you to have a BNC to RCA adapter from Radio Shack. there is no other way? ho do they do it at apartment buildings where you can see the front door csmera on one of the higher channels with your tv cable.

Thanks Tip_ex for the info. where do i get browser client? and do i have to have my own server for this to work?, or what server do i use? Another question is i decided to install the camera's myself on my house, any helpful hints, tricks, of info that would help me put? How high from gound level should the camera's be? my camera's are pritty basic nothing fancy ( dome style ). With the intellex unit i have how do i hook it up to my television cable to see the camera or camers's ? i had the system running with one camers hooked up to i, well someone hit my car at the front of the house and the unit captured the footage. How do i export the image, to a usb or cd, dvd,etc. This unit does not have no cd drive in it, only a floppy drive. what type of drive can i install if needed and how do i set it up to work with the unit? Thanks Again Shawn305