cfacomputers

For now to work I hooked my camera dvr into a splitter, then from the splitters i went into the inputs of the tv's. so I just have to change the input. Can anyone recommend a 2 input modulator that isnt very expensive?

I have an 8 channel Nuvico DVR. Each TV in house which is about 7-8 rg6 lines all end up in the wiring closet with the DVR. Now I want to get the video from the cameras into my TV's. I have tried a few setups but nothing works so far. I have Cablevision for my tv service with one TV running an IO digital box. What would be the best way for me to get my cameras onto my tv's. I would just like to switch to a channel or change inputs. Any recommendations? I have tried a holland electronics modulator. each tv location has 2 cables (cable & cctv)

I have already tried something similar. -Ran camera dvr out into modulator-modulator out into spliter/cominber in. -Ran cable into splitter/combiner in -cable tv works as normal, but on channel 65 from modulator i see nothing. Would purchasing a video distribution amplifier and connecting the dvr to it and then the outputs from that going into my tvs with an rca adapter do anything? I have read this on several post.s

I purchased the cable at home depot and ran it. It has a copper center with a alum shield with copper strands. Is that a good cable? My cable dvr has the cable in then a cable out that goes to tv. How would I connect the modulator together with my cable line and the camera dvr? Should I use a spliiter/combiner or some sort of video distribution?

im confused now also, lol. Lets start over here. I will describe the setup and the I will follow recomendations. -All tv locations have to line coming out of wall. 1- Cable 1- Spare -There is only 1 TV in the house that has a cable box which is a DVR from the cable company. -I want to get the signal from my cameras DVR in basement to all the tc's in the house. -Would I use the cable line or my spare line? -What would be the best way to hook up the system?

I would only see my cameras when I had the camera line hooked up by itself to the tv input and set to channel 65. If I were to have the regular cable on and have the camera cable with and RCA adapter on it connected to lets say input 2, I can see anything when I go into input 2.