AlexB2

I installed one month ago an AVTECH 760 dvr system. For the output, I connected also the call monitor to a second TV. The problem is I cannot change from the DVR menu the dwell time. It is set for 2 seconds and I feel it is too short to see something on each camera. Best regards, Alex

Thank you C7 Thank you scorpion I tried to press the enter button or the up and down arrows but not the + or - sign. Now is working! Best wishes, Alex

I was saying that I tested only the video server configuration mode: I press the menu (on the videoserver button) I choosed advanced then display, then I went to dwell time but I wasn't able to select a different value than 2. I was able to make any other change in the manu. What I didn't try was to use the AVC760 physical buttons because it is installed in the basement and the monitor (TV) is in first floor. I cannot see the monitor while I am pressing the button. I cannot move the monitor to the basement because the stairs are not completed yet - so I will try the physical buttons with the aid of a friend and a phone line. I will watch the monitor and say him what button to press. Best regards, Alex

I tried the same procedure with the only difference that I put the DVR in "SEQ" mode using the video server. The AVC760 is installed in a basement and the TV and Computer in another storey. With the help of a friend and a telefone, I will try also the direct procedure using the AVC buttons. Best regards, Alex

Thank you for your quick answer. Unfortunately for 760 there is no firmware upgrade possible. Thanks, Alex