cgsecp

Yes, I´ve already turned it off. It keeps the problem The most interesting is that happens for all the models(501,505 and 507...) I consider it a project issue

Hi Scorpion, I will try to be more clear: I got a 04 Channel CPCAM DVR, but i want to trigger events in only one camera each time Let´s assume a building that have a camera in different floors and different rooms. All of them are in motion record mode and rarely someone passes throu the cameras, not at the same time. I did the steps you described but i noticed that if i enable to trigger events only in the camera number one, setting a specif area for the event , the DVR still records a image for the cameras number two , three and four. I am considering that didn´t have any movement in front the other cameras. How can I discovered that? If you record any event considering the scenario described before and after that i search this image and playback it all the cameras presents me with same image. The purpose of tis question is if you have the event record and enable it only for a specif camera, you don´t want the other cameras recording togheter and spend disk space. If i understood well, you said that the motion triggered in one camera, in playback mode, is showed in all the cameras but was no record for the other ones? I did a test of backup of each camera of the same event (Only camera one event recording enabled) and equipment record in a Pendrive the same event. Thanks

Hi Guys, I´ve been trying to record using a CPCAM CPD501 using event record but if I try to to that for only one camera(I enable the event record for only camera one, for instance) the DVR records the same event for all the cameras at the same time, (camera 2, 3 and 4 trigger the same image). Anybody have a solution for that ? Thanks