470

I'm in Australia and will pm you

Jake, The distributer in Australia is Altech, they are a large company and will look after you. If you were in sydney ide offer help but qld is a bit far. http://www.altech.com.au/products/showproducts.asp?subName=DVR%20Card%20(Digital%20Video%20Recorder)&catName=Surveillance

Dude, the "AS" stands for "Australian Standards" and are hosted on the Govt's standards website. So, YES, they are government standards AS 4806.1–2006–Closed circuit television (CCTV)–Part 1: Management and operation. AS 4806.2–2006–Closed circuit television (CCTV)–Part 2: Application guidelines. AS 4806.3–2006–Closed circuit television (CCTV)–Part 3: PAL signal timings and levels.

Any chance you can send me the link to the electrical/fire safety info you found on the aussie forum ? Most of our standards are pretty decent here, but as with the typical online comments, many people don't always have accurate info. The CCTV ones are supposed to be decent from what ive been told, I'm waiting till next month to purchase the new standards as our membership won't be active till the next billing cycle. I'll update you when ive read them though.

Try an Inner Range Concept 4000 running insight interfaced with a Dedicated Micros, Pacom or a couple other DVR's. FULL intergration with the alarm

Here is some info that might be of interest to you people around the world. A lot of work has gone into this. CCTV Standards Released Standards Australia recently released three new Australian CCTV standards; they are the most up to date CCTV standards available in the world today and cover the latest CCTV technologies and procedures. Australian CCTV Standards: AS 4806.1–2006–Closed circuit television (CCTV)–Part 1: Management and operation. AS 4806.2–2006–Closed circuit television (CCTV)–Part 2: Application guidelines. AS 4806.3–2006–Closed circuit television (CCTV)–Part 3: PAL signal timings and levels. http://www.cctvconsultants.com.au/standards.html You can purchase the Australian Standards here http://www.saiglobal.com/shop/Script/Result.asp?PSearch=false&Db=All&SearchType=simple&Status=all&Max=15&DegnKeyword=cctv&Search=+Go+

Guys, I went to upgrade to the newer geo software and it said my card was not compatable. so, i re-installed the older version of software and when the machine goes to load it says "this application failed to start because VCC3.dll was not found" ive tried re-installing the software etc but nothing seems to work. not particularly keen on totally reinstalling windows. any tips ? what is this VCC3.dll ? and where is it supposed to be.

panasonic PTZ's work fine with geo cards. 1. you have to set the menu in the panasonic to the correct settings (and the dip switches on the rear). ill scan in hte manual pages re dip switches if you like ??

Umm, $15 on ebay australia lol http://cgi.ebay.com.au/Use-a-PLAYSTATION-CONTROLLER-on-your-PC-COMPUTER_W0QQitemZ8272317455QQcategoryZ41059QQtcZphotoQQcmdZViewItem

been done in australia. it melts the $$ as our money is plastic.

Ive got a machine running the last downloadable version of Geo 7.05 from geo's site. basically there are several Panasonic PTZ's connected to it and it is controlled via a 485 add on card. control is just done via a mouse clicking on the pre-set locations and lr zoom etc. when I choose address 1 to control, as soon as i click on any function l, r, preset etc, it just reverts back to address 2. is there a setting that needs to be changed ??? this did not happen when running 7.0

hey, its tracka ill send u a pm in the morning

Dell SUCK! Ive had nothing but trouble with pagkages people buy from dell!

ive installed several ptz's on geovision setups. always use the Geo I/O card and mostly use the panasomic WV-CS850/854's) and get 1700+ feet without an issue. the I/O card is cheap as chips and keeps everything from the same manafacturer.

Looking for a used GV800 that somebody is selling cheap Got a customer wanting to upgrade their current setup but I only have a GV600 to loan out and not particularly keen on buying a brand new one just for a demo unit. 8 camera inputs. Genuine board ONLY! or, can anybody direct me to somebody who has one. Thanks