dvisystems1

I have done this on a few installs but i set it up on the dvr side. 1. Setup all your presets up first, then access the tours menu on the dvr / PTZ dome 2. there should be settings there to select within the tour which preset to goto and how long to set the dwell time bedore moving to the next one. 3. some domes also have setting for the speed of which to goto preset. 4. once done, start the tour by the DVR/Keyboard and that should do it..

Buy new IDE Hard Drives format the drive/s to fat32 using maxblast software £0 free downlod,and a usb to ide converter £20 and then copy the bootload files from the dedicated micros website for your correct model and version of DVR onto the master drive. Set 2 nd drive as a slave, then connect the two new drives back to the DVR and switch on. DONE..........

you can change port 80 only if the dvr software gives you the option to change it in its network configuration settings say 8000 if accessing from internet explorer: if set to 80 only put the ip addres in if changed to 8000 enter ip address thn:8000 ate end of the ip address remote software access should have it own ports for example 5100 etc..

EnNetNO (vista) version 11.0.0.28844 moves PTZ ok. but no GUI buttons for PTZ presets or Tours EnNet25 version 11.0.0.28844 moves PTZ left right up down but does not zoom. includes GUI buttons for PTZ presets or Tours download link:dvisystems.co.uk/support_download.html

Hi, can anyone help with finding a solution with the remote client software for the EnView CST EST DVR's were when remotely logged in through the EnNet20 client software i am unable to zoom in/out properly. but when using the EnView software it can pan/tilt/zoom the camera perfectly but does not have the ability to select presets or tours. Is there any other remote client software programs or updates that can do both