Maniek

Hi I have 40 cameras system with mix of Full HD Avigilon cameras, bullets, domes. System has about 10 switches , connected with fiber. Cisco SG500-28P-K9-G5 and SRW224G4P-K9-EU (SF 300-24P) Do you change switches settings to optimise system or you generally leave it by default ? Sometimes I see really small artefacts and wonder why is that. Second thing is , why it takes few seconds to switch stream from small window to large view? It's quite annoying... any ideas? ( all Avigilons) Latest firmware and software, good graphic card. Thank you for help Mariusz

Thanks for reply Here is plan for network Issue is, that sometimes for 1 or 2 minutes network looks like it is down, a lot of artefacts on all cameras ( live and recorded) No idea network is new, sfp Gbit.

Hello, what happened with market? What about AXIS, Avigilon, Arecont, Vivotek... They all crap that nobody install them? When I read forum now and 2 years ago, there is a big difference. Nobody put demo screenshots anymore... Do you agree or I am wrong? Please give some arguments ( exept price ) Regards Mariusz

OMG - Korgoth is back !!!!

Sounds good for me. I do a lot of Avigilons as well with POS solution. Any screens from installation? Regards

Hi What happened with all Arecont's installators? I have just came back from Arecont 1 day presentation, and it's looking good for me. If you don't install them? tell why? If you still install them? tell why? discusion Regards

Hi I have a instalation with 4 dome cameras and must install microphones to them. What model of microphone do you suggest? not too expensive, but reliable Will it work well wit ACC? Regards

Thank you

Hi What I noticed is Arecont's needs very good lens to have good quality picture. You cannot use " noname" stuff. I used to play with THEIA lenses, and noticed very good picture, but... price is... If yu want cheaper lens and Arecont - there is a lot of choice with other brands. Do you agree? Show your best Arecont quality you think you have, to compare. ( screenshot) regards

Good evening I have installed many Acc installations. 2 with POS System by Avigilon - with success Those were with rs connected printers. My next customer has 4 Pos points with USB only printers. It has rs ports , but they dont work properly , it is ok with usb. Aby ideas how to " sniff" pos data by avigilon with usb printer port? Very grateful for any help Regards Mariusz

Could be graphic card problem. I had this problem before. What graphic card/chipset model you have?

Agree with Avigilon I have 20 full hd and 4 hd cameras on 1 server. 5 pos points. Works very well. Avigilon Standard Version. Regards

Hi everyone. I have Geovision GV-VS12 videoserwer with 3G modem. I have a problem with setup, how to view stream over the internet. 3G modem is connected and it is workig fine, dyndns is working fine. When I do PING - there is no even ping reply from different connection.. Do I have to do port forwarding? but how ? there is no router ( or maybe I'm wrong :/ ) No idea what to do next. Any help .... , please. I have 12 diggers to do online soon. Thanks in advance Mariusz

This is traceroute result, but it doesn't say anything to me :/

A w głębi ogrodu wrota czasu?

Avigilon DOME H.264 FULL HD nOW2xLLqobU

AXIS M1014 2MmHDWTXTY0

Hi everyone. Customer wants camera in the night club, he already has few cameras and know what HD is. He would like to have HD, FULL HD cameras inside , if possible - color. What do you recomend for very specific light conditions ( disco lights, etc.), not to have motion blur ( too much)? Thanks in advance. Ps Screenshots and movies welcome.

Job's done. Avigilon software and cameras. 15 full HD dome cameras,5 x 5 megapixel jpeg200 domes and 4 Sony's SNC 120DH. Here's Sony and Avigilon screenshots. Customer is very happy. No motion blur at all in the club. In my opinion both gives very good picture, but Sony looks sharper for me, what do you think? Regards. Mariusz

Hi everyone. I have finished 29 camera system with Avigilon Ent. There are Sonys and Vivoteks 8332 ( onvif). There is fail message on screen like this. Is there any way to fix it and what is the problem? All vivoteks named " network camera" , because Avigilon don't keep camera name. After restart it says 'networkcamera" again. Also, I have a second monitor connected with spot view ( 4 cameras split every 10 seconds) and when customer logs out, he has to set up second monitor spot function again, but when he closes client with cross button ( right top corner) and run client again, software remembers all settings fine. I checked this - he is right. Any suggestions? Thanks in advance. Mariusz

Both

Hi NTP time -helped, OK, thank you Camera names- not There were Vivoteks at first time with free Viv soft I am not a dealer. System integrator Ant other way to fix camera names?

Hi I found this ...I don't know where. Cameras looks like Avigilon as well as software. They also sell Exacq ( looks like )software. What do you think about it? Is it good for such a well known brand like Exacq and Avilgilon to sell their products that way? Regards Mariusz http://clearpix.com/

Hi everyone I have a customer, who has 34 cameras, few Vivotek's IP8332, 5 Geovision's GVVD120, and 8 Sony's SNC-CH120, Vivoteks and Sonys are fine , but I have a problem with Geo connection. Camera is Onvif, but still doesn't work. I have newest firmware installed. Can you help me, please? I dont want to tell customer he has to pay for camera replacment. Regards.

Sorry ,wrong question asked before.