keemble 0 Posted February 22, 2008 helo guys.i have kalatel ptz that goes black and white for a few seconds and stays like that.but when i initially mount it,it got color then a few seconds, goes black and white.i tested it out and guess its a camera problem.do you have any fix for this?another camera has control problem when i put it on other dome.like when put it as camera 1 on dome1,so when i choose cam 1 on the keypad i can control it.but when i put it as camera 2 on dome2(diffrent dome and location) and punch cam2 on keypad.it wont move.the video is ok.any help guys? Share this post Link to post Share on other sites
crirvine 0 Posted February 22, 2008 Not sure about your ptz problem but your camera needs to be sent back for repair. Nothing you or I should try to fix. On the ptz controller (camera) 002 (camera) or try (mode) 002 (mode) Share this post Link to post Share on other sites
Walteryubo 0 Posted February 29, 2008 please check you PTZ dome 2,and change its ID code. Share this post Link to post Share on other sites
keemble 0 Posted March 5, 2008 thanks for the replies.i'll just send the camera to the supplier for repair. Share this post Link to post Share on other sites