BBNC 0 Posted February 22, 2008 I HAVE INSTALLED THIS SERVER AND WHILE WATCHING FROM INTERNET IT SAYS SERVER CLOSE EVRY SECOND, IT STARTS THEN CLOSES AND RECONNECTS IN EVRY SECOND Share this post Link to post Share on other sites
andy_geovision 0 Posted February 25, 2008 Dear BBNC, Have you opened up the port 10000 by defaut in the router? Are you able to connect your VS under the same LAN? Try to access your VS in the different remote PC..now.. what happens? Provide me with your VS IP address, userID and password... Let me try it..... Sincerely, Andy Chen Technical Support GeoVision. Inc. +886-2-8797-8377 ext 287 Share this post Link to post Share on other sites
BBNC 0 Posted March 5, 2008 can you tell me how ti install it wirelessly Share this post Link to post Share on other sites
andy_geovision 0 Posted March 7, 2008 Dear BBNC, Please choose one of three specific USB wireless cards for Video Servers. 1. Edimax, EW-7318Ug, http://www.edimax.com.tw/ 2. D-Link, DWL-G122 rev.C1/USB (must be C1 version), http://www.dlink.com 3. Linksys, WUSB54GC, http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1134691790190&pagename=Linksys%2FCommon%2FVisitorWrapper We strongly recommend the clients to use RJ 45 cable, instead of wireless network card, for stable internet connection speed..... Best Regards, ______________________________________________ Andy Chen Technical Support GeoVision. Inc. +886-2-8797-8377 ext 287 www.geovision.com.tw Share this post Link to post Share on other sites
BBNC 0 Posted March 12, 2008 hi andy you were right the wireles is not stable, now i have one more problem i have gv1480 installed in new computer and the video out is not working, iam trying to connect the video out from gv-1480 card to lcd tv, but it say no signal, if i connect any camera it shows on lcd, and one more thing on the main screen that is the multi cam i dont have the video out button on the side as shown in the manual i only have ptz thats it Share this post Link to post Share on other sites
BBNC 0 Posted March 12, 2008 hi andy how can i see remotely on my iphone is there any possibiliies as when i connect it comes to pass word screen and freezes Share this post Link to post Share on other sites
andy_geovision 0 Posted March 12, 2008 Please try the followings. 1. Open up the GeoVision Software. 2. Click " Configure >> DSP Spot Monitor >> Spot Monitor Setup ". 3. Check a box called, " Use DSP as spot monitor at next start up ". 4. Restart the GeoVision software. 5. Click " Configure >> DSP Spot Monitor >> Spot Monitor Controller. 6. Click Advance layout tag. Pick the one layout.. then click OK... Did you see any image on the LCD TV? Sincerely, Andy Chen Technical Support GeoVision. Inc. Share this post Link to post Share on other sites
andy_geovision 0 Posted March 12, 2008 Sorry dude.... The iphone is not ready yet... Sincerely, ______________________________________________ Andy Chen Technical Support GeoVision. Inc. +886-2-8797-8377 ext 287 Share this post Link to post Share on other sites
BBNC 0 Posted March 12, 2008 i cant see anu dsp monitor in configuration ,I have multicam surveillance system version 8.12 Share this post Link to post Share on other sites
BBNC 0 Posted March 12, 2008 the video card what i have is ati radeon hd2400 pro Share this post Link to post Share on other sites
BBNC 0 Posted March 13, 2008 one more thing the card is 480fps but when i connect from internet for remote viewing it gives like 6-7 fps some time it freezes Share this post Link to post Share on other sites
BBNC 0 Posted March 13, 2008 how can i get the latest version of the software this forums doesnot allow to pm you can you send me the link on my email, karim@ic.cd Share this post Link to post Share on other sites
