PMA 0 Posted February 24, 2008 OK, At my place, for test and fun I was using 2 machines. 1 computer for ip cameras and 1 with dvr card for analog cams. I would like to integrate them all in one machine plus add some webcams that I have laying around, for fun also. Total maybe 7 Ip/analog/webcams. I can run them perfectly with Milestone having the analog going thought a Ip matrix but, theres always a but, can't get the webcams there... Already tried a couple of software to test. 1. Active Webcam: - Huge cpu monger - Does not recognise the dvr bt878a card drivers, so have to use Ip matrix and get the analog cams into the soft thought an Ip adress - Not user friendly, crashes, many individual settings for each camera wich are not centralized and can not be applied to all. - Hard remote client setup - Bad support, or not exists 2. WebcamXp: . Better cpu usage - Does not accept analog cams, so have to use Ip matrix and convert them to Ip - Very few security options like motion pre trigger, delay, etc., archiving, changing paths for the cams and software - Crazy motion detection algorithm, some cams are always detecting motion some never..... crazy - Easy remote client setup thought H T T P, runs a local h t t p server (works fine) What else may I try that incorporates Ip, analog (throught dvr card and not Ip matrix), webcams with moderate Cpu usage and good security options? Share this post Link to post Share on other sites
rory 0 Posted February 29, 2008 LuxRiot is a good one for Generic cards (or brands with BT Drivers) and IP/webcams. Share this post Link to post Share on other sites
PMA 0 Posted February 29, 2008 Thank you guys. Was actually checking right now I-catcher. Guess I have 3 to test ... thanks After I tested the 3 ... I will write some comments about them... might help other members. Share this post Link to post Share on other sites
rory 0 Posted February 29, 2008 This is something I posted a long time ago geared towards DVR cards, perhaps I can add your review in there also, as times have changed since then and the software may have improved in the case of some that I linked to there, and ofcourse there are now other software available as mentioned http://www.cctvforum.com/viewtopic.php?t=2021 Share this post Link to post Share on other sites