shift_grind 0 Posted February 29, 2008 Ive got a DVMRe 10cd up and running, and just installed the latest wavereader 4-2 off GE's site i cant connect to my DVRe. im on a small network with a linksys router, the ip address of the dvr should be 192.168.1.102, its port #3 of the router, ip's starting at 192.168.1.100 i opened port forwarding for port 1024. in my address book, i selected these and cant connect to the dvr....what am i doing wrong? Share this post Link to post Share on other sites
rory 0 Posted February 29, 2008 Hi, have you setup the IP, Subnet and Gateway in the DVR itself? If so, is that Ip the one that was used to port forward to? Share this post Link to post Share on other sites
shift_grind 0 Posted February 29, 2008 no, i haven't when i hit the network button, it asks me for a password, i don't know it. ive been trying to get a hold of the guy i bought it from with no luck whats the default? its only 4 digit, so i can find it out eventually, unless it locks me out with so many incorrect entries. Share this post Link to post Share on other sites
rory 0 Posted February 29, 2008 They may have changed it and also not sure if it might differ from versions as I havent used the CD just the CT but ... 3477 was the default on most of the GE Advanced menus (i think, been a while) But yeah you need to get in the network section and assign the IP, Subnet and Gateway. Share this post Link to post Share on other sites
shift_grind 0 Posted March 1, 2008 worked great, thanks! it was the default password. Share this post Link to post Share on other sites