Securitymaster 0 Posted March 6, 2008 Ok, I saw it here before, but can't find it. The gadget that allows you to combine the signal of 2 cameras down one video line, then split them again at the dvr. Thanks. Share this post Link to post Share on other sites
rory 0 Posted March 6, 2008 http://www.foresight-cctv.com/VDS.htm Share this post Link to post Share on other sites
Securitymaster 0 Posted March 6, 2008 Thanks, but I have been looking to see what I can expect to pay for this (dealer), if someone knows the price range, please post it on the dealer section so I have an idea, will probably need on a upcoming project. Thanks. Share this post Link to post Share on other sites
rory 0 Posted March 6, 2008 They sell direct, just shoot them an email. Its not much actually, but it has limitations (has to be a certain Coax cable) Or do a search on google for VDS2500 to find some distributors. Share this post Link to post Share on other sites
kensplace 0 Posted March 6, 2008 There is another I have seen around called SNT DUO (google for that term) they do various ones, two cams + power down one coax, or one cam + power + rs485 down one coax etc. Not used any so not sure what they are like though... Share this post Link to post Share on other sites
survtech 0 Posted March 6, 2008 FM Systems also makes them, but they are expensive: Transmitter Video-Plexer (Two Channel Video Di-Plexer) Part Number: TVP-20/RVP-20 Title: Transmitter Video-Plexer (Two Channel Video Di-Plexer) Category: CCTV Industry: CCTV/Security, These devices are used to transmit two CCTV Camera signals over a single Coaxial Cable at the same time, in one direction or opposite directions. This system can be used to Add-On a second camera in an existing Coaxial camera system without the need to run additional cable. Price: $640.00 Share this post Link to post Share on other sites
