AV760 entering system config

[lucan138 0]

Hi, New to this site so bear with my ignorance.

I have stupidly set my AV760 to PPPOE and can no longer log in to DVR.

Does anyone know how I can reset to static IP.

Thanks in advance for any help.

lucan138

[trotsky2 0]

Hi, New to this site so bear with my ignorance.

I have stupidly set my AV760 to PPPOE and can no longer log in to DVR.

Does anyone know how I can reset to static IP.

Thanks in advance for any help.

lucan138

can't be sure but if you have a lithium backup on the processor board, you may find a reset switch or jumper to disable battery this should reset firmware to factory specs (providing defalt is "static")

keep in mind this action may void any warranties

[securicorp 0]

Hi, New to this site so bear with my ignorance.

I have stupidly set my AV760 to PPPOE and can no longer log in to DVR.

Does anyone know how I can reset to static IP.

Thanks in advance for any help.

lucan138

 

If you have access to the DVR, enter the menu, look for system, then look for network, there you will be able to change system back to static.

[scorpion 0]

http://scorpiontheater.com/reset.aspx

[si_kungs 0]

if your dvr is in a remote location. you need to go to the site and do the changes in the network setting of the dvr.