AVTECH 761, cannot access over the internet, PLEASE HELP!!!

[jcfigueroav 0]

First time user.

 

AVTECH 761, camera 1 installed.

Router = LINKSYS WRT54G (just Plugged and Played)

Internet Access = CABLE MODEM/COMCAST

DynDNS account already setup = connectswfl (dot) dyndns (dot) org

DVR settings = default (starting point)

 

I was able to access the DVR thru the LAN with 192.168.1.10 then when I started to setup DHCP in the DVR, once I changed from Static to DHCP in System Config/Network/IP Type using AP software, AP software lost connection and I was not able to log back in. I checked the DVR under Menu/Advanced/Network/DHCP and the IP changed to 192.168.1.101 I tried it and it worked.

I enabled and added the DDNS information under System Config/Network/DDNS. I tried to access the DVR using the domain, it didn't work. If I use 192.168.1.101 I'm still able to access the DVR.

By the way, the DVR shows IP = 192.168.1.101 and Gateway = 192.168.1.1 but AP software shows Server IP = 192.168.1.10 and Gateway = 192.168.1.65

 

I guess I'm missing steps, I'd appreciate any help.

[mariancoco 0]

hi

your DVR is set corectly ?

first set your DVR with default setings

second, check iour LAN IP classes Ex 192.168.1.X

your router must have LAN IP 192.168.1.1 or 192.168.1.254

set your DVR IP 192.168.1.10 (default), GW 192.168.1.1 or 192.168.1.254

same your router LAN IP

and SM 255.255.255.0

[jcfigueroav 0]

Thanks for taking the time to answer.

 

DVR settings were default

IP = 198.162.1.10

Gateway = 198.162.1.1

Subnet Mask = 255.255.255.0

after I changed Static for DHCP, settings changed to

IP = 198.162.1.101

Gateway = 198.162.1.1

Subnet Mask = 255.255.255.0

I can still access my DVR in LAN using 192.168.1.101 even with Video Server E, but I cannot access it over the internet.

In the other hand, when I use the remote control to see the settings directly from the DVR, the settings are different than the ones I can see thru Video Server, Video Server shows

IP = 198.162.1.10

Gateway = 198.162.1.65

Subnet Mask = 255.255.255.0

I tried to change them but I can't.

[scorpion 0]

http://scorpiontheater.com/videonetworkingwithavtech.aspx

[jcfigueroav 0]

After many hours pulling my hair I can see my DVR on my LAN using the dyndns account. Video Server E pulls my IP address in the screen when it connects. Now ... am I online?

 

Could anybody check? ... please ...

 

connectswfl (dot) dyndns (dot) org

guest

guest

 

Thank you!

[davec 0]

I logged in about 2:35am(michigan DST). Looks good, I was receiving about 4fps. Don't know enough to be able to tell you anymore. Good luck.

Dave

[mr.surveillance 0]

I logged in about 01:25 California time and its working 2.48 to 3.5 fps

[d_guth 0]

looks good from here too....East Coast Canada

[si_kungs 0]

looks good from here too. 4.81fps my location is manila philippines

[jcfigueroav 0]

Thank you very much to all of you!

 

It's my first experience in a forum (believe it or not). It was great!

 

Scorpion, those links are awesome material! Thank you, they answered most of my questions.

 

I'll be asking for help again ... for sure ...